Disc Brake Pads SwissStop Disc 35 RS Pair & Fair

The RS pads are extremely quiet in all conditions. The compound is silent in wet, dry, snowy and icy conditions.

The SwissStop RS disc pads offer powerful and consistent braking performance. The RS disc pads deliver strong braking performance and offer a balanced combination of features that are important for both racing cyclists and everyday riders. The carrier plate, made from a steel alloy and just 1.6 mm thick, saves weight compared to traditional designs whilst retaining the beneficial thermal properties as well as the strength and stability of steel. The thinner carrier plate is fitted with an additional pad compound, thereby extending the service life of the disc pad.

Compatible with:

• SRAM Red eTap AXS Gen. 2 two-piece caliper, Gen. 3 E1 disc brakes
• SRAM Force eTap AXS, Rival eTap AXS disc brakes
• SRAM Level Ultimate, TLM B1 2020+ model, TL, T, Level disc brakes
• Avid Elixir 9, 7, 5, 3, 1, CR, R disc brakes
• The scope of delivery includes spring and brake pad retaining screws

SwissStop Disc 35 RS features:

• Consistently quiet in use, in wet, dry, snowy and icy conditions
• Transparent feel at the lever
• Braking power that is predictable and progressive
• Long service life

PLEASE NOTE:

The brake pads must be bed-in to achieve optimum braking power and durability

• Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
  this process 2–3 times.
• Step 2: On a steeper descent, let both brakes drag alternately for 10–15 seconds each, stopping almost completely. Repeat
  this process 2–3 times.
• Pro tip: Break in the rear brake pads on the front wheel. Follow the instructions above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!

SWISSSTOP PAIR & FAIR PROJECT:

PAIR & FAIR is an innovative SwissStop project featuring a new delivery option of two pairs of pads per pack and the introduction of a more environmentally friendly, FAIRER paper-based packaging design. In addition, SwissStop donates to the global effort to remove plastic from waterways. By packaging two complete sets of brake pads in a single box, we can halve the amount of packaging material required. This significantly reduces the environmental impact of the packaging itself, whilst also improving the efficiency of storage, transport and retail space. Each PAIR & FAIR box contains four brake pads as well as the springs, screws and clips required for fitting. The construction is made from 100% paper and the materials are fully FSC-certified. This new design represents a significant step forward in the sustainability of our product packaging.

Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de