Disc Brake Pads SwissStop Disc 35 E Pair & Fair

SwissStop disc pads for e-bikes, featuring a special coating for quiet braking, offer very easy modulation of braking force. Designed for higher system weights and extremely heat-resistant. SwissStop E brake pads ensure minimal vibration and are extremely quiet.

SwissStop Disc E Brake Pad Characteristics

• Durable, high-endurance pad compound
• Very easy modulation of braking force
• High temperature stability for consistent braking performance
• organic pad compound, quiet and causes minimal wear on the rotor

Compatible with:

• SRAM Red eTap AXS Gen. 2 two-piece calipers, Gen. 3 E1 disc brakes
• SRAM Force eTap AXS, Rival eTap AXS disc brakes
• SRAM Level Ultimate, TLM B1 2020+ model, TL, T, Level disc brakes
• Avid Elixir 9, 7, 5, 3, 1, CR, R disc brakes
• The scope of delivery includes springs and brake pad retaining screws

ATTENTION: The brake pads must be bedded in to achieve optimum braking power and durability

Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
this process 2–3 times.

Step 2: On a steeper descent, let both brakes drag alternately for 10–15 seconds each, stopping almost completely. Repeat
this process 2–3 times.

Pro tip: Break in the rear brake pads on the front wheel. Follow the procedure described above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!

SWISSSTOP PAIR & FAIR PROJECT:

PAIR & FAIR is an innovative SwissStop project featuring a new delivery option of two pairs of pads per pack and the introduction of a more environmentally friendly, FAIRER paper-based packaging design. In addition, SwissStop donates to the global effort to remove plastic from waterways. By packaging two complete sets of brake pads in a single box, we can halve the amount of packaging material required. This significantly reduces the environmental impact of the packaging itself, whilst also improving the efficiency of storage, transport and retail space. Each PAIR & FAIR box contains four brake pads as well as the springs, screws and clips required for installation. The construction is made from 100% paper and the materials are fully FSC-certified. This new design represents a significant step forward in the sustainability of our product packaging.

Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de