E-bike disc brake pads, Swiss Stop Disc28C, organic-resin compound, 1 pair including springs and split pins, for Shimano MTB, road bike and Alfine disc brakes with two-piston post-mount calipers
Disc Brake Pads SwissStop Disc 28C
SwissStop organic disc pads, with a special coating to prevent brake squeal and excellent braking performance.
Precise modulation, low wear. The optimal organic brake pad compound, made from various materials bound with resin, delivers excellent braking performance with minimal effort on the brake lever.
SwissStop Disc Type C Brake Pad Characteristics
- Precise modulation, low wear.
- An optimal blend of various materials combined with resin delivers excellent braking performance with minimal effort on the brake lever.
- Good braking performance in both dry and wet weather conditions.
- Low wear.
- Springs and clips are always included with SwissStop brake pads.
These brake pads are compatible with Shimano 2-piston calipers from the
- XTR disc brakes: BR-M9000, BR-M9020, BR-M987, BR-M985
- XT disc brakes: BR-M8100, BR-M8000, BR-M785, BR-M675, BR-M615, BR-RS785
- SLX disc brakes: BR-M7100, BR-M7000, BR-M615, BR-M666, BR-M6000
- Deore disc brakes: BR-M6100, BR-M6000, BR-M615
- Alfine disc brakes: BR-S700, BR-S7000
- Road disc brakes: BR-RS785, BR-R785, BR-CX75, BR-R515, BR-R315
- FAS disc brakes: K Force DT-TX900, Afterburner DB-TX-9150
IMPORTANT: The brake pads must be bed-in to achieve optimum braking power and durability
Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
this process 2–3 times.
Step 2: On a steeper descent, let both brakes drag alternately for 10–15 seconds each, stopping the bike almost completely. Repeat
this process 2–3 times.
Pro tip: Break in the rear brake pads on the front wheel. Follow the procedure described above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!
Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de
