Shimano SLX Disc Brake Set M7120 with SM RT66 Discs

The Shimano SLX Disc M7120 disc brake set for all-mountain to enduro use, featuring 4-piston calipers and classic SM RT70 steel brake discs in sizes ranging from 160 to 203 mm.

New I-Spec EV mount for 12-speed MTB shift levers, high braking power, excellent heat dissipation, easier bleeding, ergonomic brake lever design, high-strength SM-BH90-SBM disc brake hose. Shimano has redesigned the maintenance-free brake for 12-speed MTB groupsets. From cross-country to trail riding, the SLX 7120 disc brake impresses with its reliability, low weight and high braking power.

Included:

• SLX front disc brake, BLM7120 left-hand lever, BRM7120 brake caliper including brake pads, SMRT70 brake disc, SM-BH90-SBM brake hose 100 cm long, disc and adapter as selected
• SLX rear disc brake, BLM7120 right-hand lever, BRM7120 caliper including brake pads, SMRT70 brake disc, SM-BH90-SBM brake hose 170 cm long, disc and adapter as selected

. The necessary screws, washers and spare hose nipples for assembly are included in the scope of delivery.

These brakes are supplied without oil. The One-Way-Bleeding funnel TL-BR003 and SMDBOIL oil are required for bleeding.

Shimano SLX BL M7100 - BR M7120 Disc Brake Technology:

• forged aluminium 4-piston brake caliper BR M7120, Post Mont 6
• Aluminium brake lever
• Adjustable lever reach
• IceTech brake pads
• Compatible brake pads: Shimano D03S-RX, N03A-RF, D02S-MX, N04C-MF
• Brake hose SM-BH90-SBM
• Hose length 100–170 cm
• Oil required: SMDBOIL
• Weight approx. 420 grams (manufacturer’s specification)

Shimano Deore SLX Brake Lever BL M7100:

The SLX brake levers, featuring a 1.5-finger lever for ergonomic handling, are suitable for direct mounting with I-Spec EV shift levers. The free play has been reduced, resulting in an even more direct response. The brake levers follow the design of the XTR brake levers and are also mounted at an angle rather than parallel to the handlebars, so that they are supported at a second point on the handlebars in addition to the clamp, making them significantly stiffer than before. For individual adjustment, the levers are equipped with a tool-free grip width adjustment and a dead-travel adjustment.

Shimano SLX BR-M7120 brake caliper:

The SLX BR-M7120 4-piston brake calipers with N03 A-Resin brake pads featuring cooling fins. The SLX 4-piston BR-M7120 brake caliper, designed for all-mountain to downhill use, is torsionally rigid and approved for brake discs up to 220 mm. The brake calipers always feature the Post Mount standard and are compatible with adapters for Post Mount and IS2000 frame and fork mounts

Shimano I-Spec EV:

The new I-Spec version of the Shimano XTR shifters and brakes offers a wide adjustment range – 14 mm laterally and 60 degrees of rotation – ensuring optimal shifter ergonomics. With the I-Spec EV version, the shifter can be mounted on XTR M9100/9120 brake levers in a space-saving manner. Furthermore, mounting via the new standard offers a 14-millimetre lateral adjustment range, and the shifter can also be rotated by 60 degrees. The new I-Spec EV version is not compatible with older brakes.

Shimano SLX SM RT70 brake disc

The classic steel brake disc from Shimano. For all hubs with a Centerlock mount. As all Shimano brake discs have the same thickness, you can also use these brake discs with the new Shimano disc brakes.

The Shimano SLX Disc is supplied with Post Mount 6 brake calipers.

IS 2000: Side-mounted. An adapter is always required to fit the brake; maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Common on older suspension forks and almost all rear triangle frames

Post Mount, PM5: Direct mounting of the brake without an adapter, using 140 mm brake discs. Maximum 180 mm, minimum 140 mm disc size. Currently found only on rear triangle frames

Post Mount, PM6: Direct mounting of the brake with 160 mm brake discs without an adapter. Maximum 220 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.

Post Mount, PM7: Direct mounting of the brake with 180mm discs without an adapter. Maximum 220mm, minimum 180mm disc size. 140mm and 160mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.

Post Mount, PM8: Direct mounting of the brake without an adapter, using 203mm brake discs. Can only be used with 203mm and 220mm brake discs. Found only on downhill suspension forks and frames

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com