Shimano XTR Disc Hub FHM9111
The Shimano XTR M9100, the new flagship of Shimano’s mountain bike components, features, amongst other things, a revolutionary 12-speed cassette with a choice of 10-45 or 10-51 teeth, two- or four-piston brakes and hubs with Shimano’s new Micro Spline technology. A completely redesigned mounting system for shift and brake levers enables users to customise their cockpit for optimal control; a release lever for dropper seatposts, seamlessly integrated into this system, is also available. All in all, the new XTR has shed more than 150 g in weight compared to its predecessor in the XC configuration; for enduro use, this still amounts to a weight saving of 90 g. The operating forces and travel for shifting have been revised and optimised to guarantee intuitive control in all conditions and a focus on the challenges of the terrain.
Shimano XTR FHM9111 Rear Hub
The Shimano XTR disc brake rear hub for MTBs, gravel and touring bikes. Typical of Shimano XTR, the finest materials. Stainless steel ball rings, high-end polished raceways, angular contact bearings, double labyrinth seals and the lightweight Micro Spline freehub body are the hallmarks of the Shimano XTR rear hubs. The new bearings and seals significantly increase the service life of the Shimano XTR hubs. Designed for maximum wheel stiffness with a large flange spacing and an extended flange at the sprocket side
Shimano Micro Spline 12-speed freehub body:
the first new freehub body system since the introduction of the HG10 freehub bodies almost 20 years ago. The fine-pitch gearing ensures a perfect fit for the new Shimano 12-speed MTB cassettes. Not compatible with older Shimano HG cassettes.
The Micro Spline freehub body reduces weight with a lightweight cassette hub, whilst the smallest sprocket has 10 teeth. Smaller and more widely spaced teeth prevent sprocket damage on the freehub body, which is made from lightweight aluminium.
Shimano XTR FH-M9111 Hub Technology:
- 10 mm aluminium axle
- Super-polished raceways
- Stainless steel balls
- Angled bearings
- Spoke hole circle: 50 mm left / 61 mm right
- Flange diameter: 59 mm left / 70 mm right
- Flange spacing: 55.89 mm
- Centerlock mount for brake discs
- Aluminium freehub body
- Micro Spline freehub body for Shimano 12-speed MTB cassettes
- Mounting dimension 12x142 mm, for thru-axle mounting, not convertible
- Weight 237 grams (manufacturer’s specification)
Your custom wheel with the Shimano XTR Disc hub
Ask us for a personalised quote. We will build your dream wheel, perfectly trued by hand. Choose your preferred rim from the complete range of DT Swiss, e*thirteen, Mavic, Stans NoTubes and WTB rims. We use exclusively DT Swiss spokes. Over the last few decades – ever since we started building wheels – these spokes have proven themselves to be by far the most durable.
Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com
