Shimano XTR Disc FHM9111 Boost Hub
The Shimano XTR M9100, the new flagship of Shimano’s mountain bike components, features, among other things, a revolutionary 12-speed cassette with a choice of 10-45 or 10-51 teeth, two- or four-piston brakes and hubs with Shimano’s new Micro Spline technology. A completely redesigned mounting system for shift and brake levers allows users to customise their cockpit for optimal control; a release lever for dropper seatposts, seamlessly integrated into this system, is also available. All in all, the new XTR has shed more than 150 g in weight compared to its predecessor in the XC configuration; for enduro use, this still amounts to a weight saving of 90 g. The shift forces and travel have been revised and optimised to guarantee intuitive control in all conditions and allow riders to focus on the challenges of the terrain.
Shimano XTR FHM9111B rear hub:
The Shimano XTR disc brake rear hub for MTBs, gravel and touring bikes. True to Shimano XTR form, it features the finest materials. Stainless steel ball rings, high-end polished raceways, angular contact bearings, double labyrinth seals and the lightweight Micro Spline freehub body are the hallmarks of the Shimano XTR rear hubs. The new bearings and seals significantly increase the service life of the Shimano XTR hubs. Designed for maximum wheel stiffness with a wide flange spacing and a raised flange on the sprocket side.
Shimano XTR Boost 12x148 rear hub:
The Boost 12x148 rear hubs feature a wider hub body with spoke holes and flanges positioned further outwards. This makes these wheels even more laterally stiff and durable. Due to the wider hub design with a 148x12 mm thru-axle mount, these hubs cannot be fitted to frames with an X12x142 mm mounting dimension and are only compatible with frames featuring a Boost 12x148 mm rear end
Shimano Micro Spline 12-speed freehub body:
the first new freehub body system since the introduction of HG10 freehub bodies almost 20 years ago. The fine-pitch gearing ensures a perfect fit for the new Shimano 12-speed MTB cassettes. Not compatible with older Shimano HG cassettes.
The Micro Spline freehub body reduces weight when used with a lightweight cassette hub, with the smallest sprocket having 10 teeth. Smaller and more widely spaced teeth prevent sprocket damage on the freehub body, which is made from lightweight aluminium.
Shimano XTR FH-M9111-B Boost Hub Technology:
- Aluminium axle
- Super-polished raceways
- Stainless steel balls
- Angled bearings
- Spoke hole circle: 47.25 mm left / 61 mm right
- Flange diameter: 56.25 mm left / 70 mm right
- Flange spacing: 63.06 mm
- Centerlock mount for brake discs
- Aluminium freehub body
- Micro Spline freehub body for Shimano 12-speed MTB cassettes
- Boost mounting dimension 12x148 mm, for Boost thru-axle mounting, not convertible
- Weight 241 grams (manufacturer’s specification)
Your custom wheel with the Shimano XTR Disc hub
Ask us for a personalised quote. We will build your dream wheelset, perfectly trued by hand. Choose your preferred rim from the complete range of DT Swiss, e*thirteen, Mavic, Stans NoTubes and WTB rims. We use exclusively DT Swiss spokes. Over the last few decades – ever since we started building wheels – these spokes have proven themselves to be by far the most durable.
Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com
