DT Swiss RWS Titanium-Aluminium Quick Release

RWS stands for Ratchet Wheel Mounting System => the innovative wheel mounting system from DT Swiss! Instead of the eccentric clamping principle developed for road bikes over 80 years ago, the RWS builds up clamping force by tightening a screw connection with a lever. The lever can be set to any position by lifting it axially and turning it.

Operation is incredibly simple: tighten the clamp by turning the lever clockwise as tightly as possible by hand, applying a minimum of 15 Nm of torque. Depending on the frame or fork design, this can also be achieved by flipping the lever several times. Then lift the lever and turn it to the desired position – the wheel is securely and firmly mounted. Because there are no plastic parts in the force path with the RWS, the clamping force is temperature-independent, making the RWS 100 per cent compatible with disc brakes!

Thanks to the direct transfer of lever force to the thread, the RWS achieves up to 50 per cent higher clamping force than existing eccentric quick-release mechanisms. This is not only safer but also increases stiffness, which is particularly noticeable with disc brakes.

DT Swiss RWS quick-release technology:

• safe and simple operation
• up to 50 per cent higher clamping force than previous systems
• 100 per cent compatible with disc brakes, as it is temperature-independent
• No plastic parts in the force transmission path
• Freely selectable lever position without affecting clamping force
• Axles made from high-strength Swiss titanium
• Clamping lever made from aluminium
• 100 per cent Swiss-made
• Clamp for 100 mm MTB front wheel hubs.
• Approved for suspension fork installation
• Weight 44 grams

Herstellerinformation: DT Swiss, Längfeldweg 101, 2504 Biel, Bern, Switzerland, https://www.dtswiss.com/