DT Swiss XRC 1501 Spline One 30 Boost wheelset

The cross-country wheels from the DT Swiss Spline 1501 Spline One Carbon series with 30 mm full-carbon rims. Very light, from 1544 grams, agile yet stable enough for tough MTB use

Specifically tailored to the performance-conscious cross-country rider, the XRC 1501 SPLINE ONE wheels leave nothing to be desired. The lightweight, 30 mm wide carbon rims provide ideal support for modern XC tyres. They roll on race-proven and super-reliable 240 hubs with RATCHET EXP freehub, which, thanks to cold-forged spokes and high-quality wheel construction, convert every ounce of energy into forward motion.

The DT Swiss XRC 1501 Spline One 30, with a 36 mm rim width and weighing just 1544 grams for the wheel set, is lightweight yet stable enough for cross-country and marathon use. Thanks to the high-end 240 EXP hubs with rust-proof ball bearings and the lightweight 30 mm wide carbon rims, the XRC 1501 Spline One wheels offer excellent acceleration. The legendary reliability of the Ratchet System hub and the straight-pull spokes combine to create the perfect competition wheel.

DT Swiss EXP 240 hubs:

The DT Swiss 1501 wheelset series features the 240 EXP hubs. The DT Swiss 240 EXP straight-pull hubs offer minimal weight combined with exceptional durability. The new axle system, with 15 per cent more support width, increases hub stiffness. The EXP feature on the DT Swiss 240 hubs involves the integration of the pawl and threaded ring, which reduces the number of components and thus lowers the weight. A single cylinder spring ensures faster, complete engagement and therefore greater reliability. The complete interlocking of the spline rings creates a large contact surface and thus low point loads, resulting in superior reliability. The stainless steel ball bearings have proven to be extremely reliable and durable since the introduction of the 240 hubs. The patented freehub body works with spline rings that interlock. This guarantees loss-free power transmission.

DT Swiss Spline One Boost 12x148 rear hub:

The DT Swiss Boost rear hubs feature a wider hub body with spoke lugs and flange positioned further outwards. This makes these wheels even more laterally stiff and durable. Due to the wider hub design with a 148x12 mm thru-axle mount, these hubs cannot be fitted to frames with an X12x142 mm mounting dimension and are only compatible with Boost 12x148 mm and Boost 10x141 mm rear-end frames

DT Swiss XRC 1501 Spline One 30 rims:

Carbon allows for the production of a 30 mm wide rim that provides ideal support for modern tyres, enables lower tyre pressure and thus reduces rolling resistance on rough surfaces. Thanks to the low moment of inertia of a carbon rim, the DT Spline One wheelsets offer rapid acceleration and precise handling. With an internal rim width of 30 mm, they are ideal for cross-country and all-mountain use. The rims of the XRC1501 wheelsets are exceptionally light and sturdy. With an outer rim width of 36 mm, tyres ranging from 2.1 to 3.0 inches in width can be fitted. Thanks to new rim spokes, the DT Swiss Spline One rims are ideally designed for upgrading with a tubeless kit. DT Swiss has also developed new tubeless kits specifically for this purpose. These are included in the scope of delivery

DT Swiss EXP Ratchet Star Freehub Body System:

The EXP Ratchet Star freehub body system uses two ratchet discs, each with 36 teeth. This ensures loss-free power transmission, extreme durability and virtually no play when pedalling. The freehub bodies can be fitted without tools. The freehub bodies are available for classic 8–11-speed HG cassettes from Shimano and SRAM, for the SRAM XD system with SRAM 11- and 12-speed XG cassettes, and for 12-speed Shimano Micro Spline cassettes. The DT Swiss Star Ratchet System enables easy conversion to various axle or rotor standards. The DT Swiss Star Ratchet EXP rear hubs can be easily converted to fit standard mountings: 10x135 quick-release, 10x135 thru-bolt, and 12x142 mm X12 thru-axle mountings. The EXP rear hubs are also compatible with classic endstops, offering a wide selection for almost all mounting systems.

DT Swiss Straight Pull Competition Race Spokes:

To achieve an ideal balance between weight and stability, only the highest quality straight pull spokes are used in Spline One wheelsets. They are more stable than conventional spokes yet can still be trued and replaced using standard tools. The straight-pull lacing allows for precise placement and alignment of the spokes. This optimises wheel stiffness and eliminates any unwanted stress peaks.

DT Swiss XRC 1501 Spline One 30-inch wheel specifications:

• 29-inch ETRTO: 622 x 30
• Rims: Full carbon DT Swiss rim
• Rim dimensions: inner width 30 mm, outer width 36 mm, height 25 mm
• Top-end 240 EXP series hub with stainless steel ball bearings
• Ratchet Star freehub with 36-tooth sprocket
• DT Swiss Straight Pull spokes: butted, cold-forged spokes
• Nipples: DT Pro Lock aluminium nipples
• Lacing: 3-cross
• 28 spokes per wheel
• Maximum tyre width 3.0
• Brake disc mount: Disc Centerlock
• Boost rear hub 12x148 mm clamping width for Boost thru-axle mounting, convertible to 10x141 mm Boost quick-release mounting
• Ratchet Star freehub body, available as:
  • HG10 aluminium freehub body for Shimano and SRAM 8–10-speed cassettes and 11-speed Shimano MTB cassettes
  • SRAM XD aluminium freehub body for SRAM 11- and 12-speed XG MTB cassettes
  • Micro Spline aluminium freehub body for Shimano 12-speed XTR MTB cassettes
• Weight approx. 816 grams, manufacturer’s specification
• Maximum recommended system weight (rider and bike): 110 kg
• ASTM classification: 3

Scope of delivery DT Swiss XRC 1501 Spline One 30 Boost wheel:

DT XRC 1501 Spline One 30 Boost rear wheel, freehub body as selected, end stops for Boost thru-axle mounting, Centerlock adapter, tubeless rim tape, tubeless valve

Compatible rear hub end caps:

• HG10 end caps, Boost thru-axle set 12x148mm Item No: HWGXXX00S2754S
• Sram XD end caps, Boost thru-axle set 12x148mm Item No: HWGXXX00S2755S
• Microspline end caps, Boost thru-axle set 12x148mm Item No: HWGXXX00S2756S
• HG10 End Stops Set, Boost Quick Release 10x141mm Item No: HWGXXX0001528S
• Sram XD end stops set, Boost quick release 10x141mm Item No: HWGXXX00S3115S
• Left end stop, Boost thru-axle 12x148 mm Item No.: HWAXXX00S2767S
• HG10 Right End Stopper, Boost Thru-Axle 12x148 mm Item No.: HWA00100S2764S
• Micro Spline Right End Stopper Boost Thru-Axle 12x148 mm Item No.: HWAXXX00S2766S
• Sram XD Right End Stop Boost Thru-Axle 12x148 mm Item No: HWAXXX00S2767S
• HG10 Right-hand end stop Boost quick release 10x141mm Item No.: HWAXXX00S1043S
• Micro Spline right-hand end stop Boost quick-release 10x141 mm Item No.: HWAXXX00S7112S
• Sram XD Right-hand end stop Boost quick-release 10x141 mm Item No.: HWAXXX00S3115S

Compatible rear wheel spare parts:

• Tubeless valve 18–25 mm black Item No.: TVVXA32S23757S
• Tubeless rim tape 32 mm Item No.: TVX3210S29846S
• Ball bearing 15 x 26 x 7 mm Item No.: HSBXXX00N3741S
• EXP hub axle 15 x 52.85 mm Item No.: HCCXXX00S3303S
• Seal, freewheel/hub 30 x 36 x 2.5 mm Item No. HRDXXX00N8242S
• EXP axle spacer Part No. HSOXXX00N1031S

DT Swiss EXP MTB freehub body

• DT Swiss EXP Rotor Ceramic Bearing, Micro Spline with End Stop 12x148 mm Thru-Axle Mounting Part No: HWYCBL00S5375S
• DT Swiss EXP Rotor, Micro Spline with end stop, 12x148 mm thru-axle mounting, Part No: HWYABL00S5374S
• DT Swiss EXP Ceramic Bearing, Rotor Micro Spline Item No: HWRCBL00S2742S
• DT Swiss EXP Rotor, Micro Spline Part No: HWRABL00S4863S
• DT Swiss EXP Rotor Ceramic Bearing, Sram XD with end stop, 12x148 mm thru-axle mounting, Part No: HWYCBL00S5373S
• DT Swiss EXP Rotor, SRAM XD with end stop, 12x148 mm thru-axle mounting, Part No: HWYABL00S5372S
• DT Swiss EXP Rotor Ceramic Bearing, SRAM XD Item No.: HWRCBL00S2809S
• DT Swiss EXP Rotor, SRAM XD Part No: HWRABL00S3830S
• DT Swiss EXP Rotor Ceramic Bearing, HG10 with end stop 12x148 mm thru-axle mounting Part No: HWYCBL00S5371S
• DT Swiss EXP Rotor, HG10 with end stop, 12x148 mm thru-axle mounting, Part No: HWYABL00S5370S
• DT Swiss EXP Ceramic Bearing, Rotor HG10 Item No.: HWRCBL00S3419S
• DT Swiss EXP Rotor, HG10 Part No: HWRABL00S3123S

Herstellerinformation: DT Swiss, Längfeldweg 101, 2504 Biel, Bern, Switzerland, https://www.dtswiss.com/