Disc brake pads, Swiss Stop Disc32 RS, extremely quiet organic pad compound, 1 pair, including springs and split pins, for Sram Road HRD, eTap HRD and Level brake calipers
Disc Brake Pads SwissStop Disc 32 RS
The RS pads are extremely quiet in all conditions. The compound is silent in wet, dry, snowy and icy conditions.
SwissStop RS disc pads offer powerful and consistent braking performance. The RS disc pads deliver strong braking performance and offer a balanced combination of features that are important for both racing cyclists and everyday riders. The carrier plate, made from a steel alloy and just 1.6 mm thick, saves weight compared to traditional designs whilst retaining the beneficial thermal properties as well as the strength and stability of steel. The thinner carrier plate is fitted with an additional pad compound, thereby extending the service life of the disc pad.
Compatible with:
- Sram Level Ultimate, Level TLM disc brakes, 2016–2019 models
- SRAM Road Apex Apex 1 HRD, Rival Rival 22 HRD B1, Rival 1 HRD, Force Force 22 HRD B1, Force 1 HRD, Red eTap AXS, Gen. 1 Mono-Bloc caliper, eTap HRD, Red 22 HRD, B1 disc brakes,
- The scope of delivery includes springs and brake pad retaining screws
SwissStop Disc RS Brake Pad Characteristics:
- Consistently quiet in use
- Transparent feel at the lever
- Braking power that is predictable and progressive
- Long service life
IMPORTANT: The brake pads must be bedded in to achieve optimum braking power and durability
Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
this process 2–3 times.
Step 2: On a steeper descent, let both brakes drag alternately for 10–15 seconds each, stopping the bike almost completely. Repeat
this process 2–3 times.
Pro tip: Break in the rear brake pads on the front wheel. Follow the procedure described above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!
Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de