Disc Brake Pads SwissStop Disc 35C

An optimal blend of various materials bonded with resin delivers excellent braking performance with minimal effort on the brake lever. Good braking performance in both dry and wet weather conditions. Low wear. Springs and clips are always included with SwissStop brake pads.

Compatible with:

• Sram Red eTap AXS Gen 2 Two-Piece caliper disc brakes
• SRAM Force eTap AXS disc brakes
• SRAM Rival eTap AXS disc brakes
• SRAM Level Ultimate, TLM B1 2020 model and later, TLT disc brakes
• SRAM XX, XO disc brakes
• Avid Elixir 9, 7, 5, 3, 1, CR, R disc brakes

SwissStop Disc 34 C Characteristics:

• Low wear
• Good braking performance in both dry and wet weather conditions.
• The service life of all components is maximised

ATTENTION:

The brake pads must be bedded in to achieve optimum braking power and durability

Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
this process 2–3 times.

Step 2: On a steeper descent, let both brakes drag alternately for 10–15 seconds each, stopping the bike almost completely. Repeat
this process 2–3 times.

Pro tip: Break in the rear brake pads on the front wheel. Follow the procedure described above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!

Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de