Magura MT 8 Pro disc brake

The Magura MT 8 Pro brakes with HC 1-finger levers. The budget version of the MT 8 disc brakes with aluminium levers. The minimalist brake caliper offers excellent heat dissipation. Aluminium brake lever and handlebar clamp are very lightweight. The brake lever can be mounted on either the right or left side; the hose length is always 220 cm

Thanks to the use of FE analysis, the Magura MT8 Pro Disc offers the absolute optimum balance between weight and rigidity. The carbon calipers are manufactured using the innovative Carbolay process, offering high strength with minimal weight. The aluminium lever allows for tool-free reach adjustment

Magura MT 8 brake lever:

The MT8 Pro HC1 brake levers can be mounted on either the right or left side

• Magura HC 1 aluminium brake lever: the short version of the brake lever offers a particularly crisp bite point. The bite point can be adjusted without tools
• Magura Carbotecture SL: A material newly developed by Magura, consisting of a high proportion of carbon fibres embedded in a thermoplastic matrix. More powerful, more tensile, more flexible and more fracture-resistant than conventional fibre-reinforced plastics or laminated carbon fibre mats. Ideally suited for processing in the Carboflow process.
• Magura Carboflow: A process newly developed by Magura that allows carbon fibres to be optimally aligned with the direction of stress. Produces homogeneous, predictable surfaces. Significant weight savings are possible, as there is no need for oversizing.

Magura MT 8 brake caliper:

The Magura MT8 brake calipers are forged from a high-performance aluminium alloy and feature the new magnetiXchange brake pistons for easy pad replacement. The one-piece brake caliper offers maximum performance and safety even on long descents thanks to efficient heat dissipation via the large surface area and the open double-arch design.

• Magura MagneticXchange: the magnetic brake pistons make it easier to fit the brake pads
• Magura Anti-Squeal: The combination of a specially formulated brake pad compound and brake disc design counteracts noise during braking.
• Magura Anti-Drag: Newly developed sealing rings and an adapted piston design ensure that, even when used in sub-zero temperatures or extremely muddy conditions, the pistons always return to their original position and do not rub against the disc.
• Magura Anti-Heat: The entire MT brake caliper system is designed to dissipate heat quickly into the surrounding environment, preventing a drop in performance.
• Magura RHR: The new Magura brakes, MT8, MT6 and MT4, come factory-fitted with a swivelling hose outlet on the spoke side to prevent damage and allow for neat hose routing on various frame designs.

Magura Royal Blood:

Magura continues to rely on high-performance mineral oil as the brake fluid. It is completely harmless to health in the event of skin contact and, as it does not absorb water over time like DOT fluid, bleeding intervals are significantly longer. For optimal performance, bleeding is required every 6–12 months, depending on frequency of use.

Magura warranty:

Naturally, Magura also offers its well-known 5-year leak-proof guarantee for the new brakes.

Magura MT8 Pro HC Disc Brake Technology

• Application: XC racing, marathon and touring.
• Technology: Fully hydraulic high-pressure disc brake with integrated reservoir.
• Brake system: Two-piston fixed caliper with automatic pad adjustment, brake disc runs without rubbing.
• Brake lever: Carbotecture lever, radial piston, aluminium HC single-finger lever, lever reach adjustment.
• Brake caliper: Post Mount 74/6
• Easybleed Technology for easy bleeding
• Hollow Pin Technology
• Brake hose 220 cm
• Brake disc: not included
• Piston diameter: Brake lever: 10.5 mm,
• Brake caliper: 2x22 mm Braking force: 6.2 m/s, DIN 79100
• Weight: 225 g, excluding disc and adapter
• Oil: Magura Rayal Blood, mineral oil
• 5-year warranty on the seal integrity of the brake lever and cylinder.

Scope of delivery for Magura MT8 Pro HC1 disc brake:

2 x Magura MT8 Pro HC1 disc brakes with 2200 mm hoses, fully pre-assembled and bled, screws and small parts required for assembly, and of course the full manufacturer’s warranty.

The Magura MT 8 Disc is supplied with Post Mount 6 brake calipers.

You can select the appropriate adapter for your fork and disc size.

IS 2000: Side mounting. An adapter is always required to fit the Magura MT8; maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Common on older suspension forks and almost all rear triangle frames

Post Mount, PM5: Direct mounting of the Magura MT8 with 140 mm brake discs without an adapter. Maximum 180 mm, minimum 140 mm disc size. Currently only found on rear triangle frames

Post Mount, PM6: Direct mounting of the Magura MT8 with 160 mm brake discs without an adapter. Maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.

Post Mount, PM7: Direct mounting of the Magura MT8 with 180mm brake discs without an adapter. Maximum 203mm, minimum 180mm disc size. 140mm and 160mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.

Post Mount, PM8: Direct mounting without an adapter for the Magura MT8 with 203mm brake discs. Can only be used with 203mm brake discs. Found only on downhill suspension forks and frames

Herstellerinformation: Magura, Stuttgarter Straße 48, 72574 Bad Urach, Germany, http://www.magura.com