Magura MT Trail Sport Disc Brake Set

The outstanding braking performance of the MT5, combined with the lightweight construction technologies of the MT6, delivers the best possible trail performance. Weighing just 485 grams, the MT Trail Sport is the powerful brake for all-mountain to enduro use.

Braking performance doesn’t have to be heavy. Maximum braking power and stability in extreme conditions – that is the MT Trail Sport’s motto. In tough enduro or all-mountain riding, the extra braking power provided by the 4-piston front brake and its precise modulation offer added safety. The tool-free adjustable brake levers and the adjustable bite point provide the necessary ergonomics to keep the brakes perfectly under control, even on rough terrain and long descents.

Magura MT Trail Sport brake lever:

the MT Trail brake levers with Carbontecture Master housing. The Magura MT Trail Carbon brake levers can be mounted on the right or left

• Magura Carbotecture: A material newly developed by Magura, consisting of a high proportion of carbon fibres embedded in a thermoplastic matrix. More powerful, tensile, flexible and fracture-resistant than conventional fibre-reinforced plastics or laminated carbon fibre mats. Ideally suited for processing using the Carboflow process.
• Magura HC 1-finger brake lever: The ergonomics of the shorter 1-finger HC aluminium lever enable full braking power, safely with just one finger.

Magura MT Trail Sport brake caliper:

The four-piston and two-piston calipers of the Magura MT Trail Sport, forged from a high-performance aluminium alloy with new magnetiXchange brake pistons for easy pad replacement.

• Forged 4-piston front and 2-piston rear brake calipers with 4 brake pads
• Magura MagneticXchange: the magnetic brake pistons make it easier to fit the brake pads
• Magura Anti-Squeal: The combination of a specially formulated brake pad compound and brake disc design counteracts noise during braking.
• Magura Anti-Drag: Newly developed sealing rings and an adapted piston design ensure that, even when used in sub-zero temperatures or extremely muddy conditions, the pistons always return to their original position and do not rub against the disc.
• Magura Anti-Heat: The entire MT brake caliper system is designed to dissipate heat quickly into the surrounding environment, preventing a drop in performance.
• Magura RHR: The new Magura brakes, MT8, MT6 and MT4, come factory-fitted with a swivelling hose outlet on the spoke side to prevent damage and allow for neat hose routing on various frame designs.

Magura Royal Blood:

Magura continues to rely on high-performance mineral oil as the brake fluid. It is completely harmless to health in the event of skin contact and, as it does not absorb moisture over time like DOT fluid, bleeding intervals are significantly longer. For optimal performance, bleeding is required every 6–12 months, depending on frequency of use.

Magura Storm HC brake disc

Particularly robust, these are the ideal brake discs for DH to all-mountain use of Magura disc brakes under high loads. The high stability, heat resistance and low wear are ensured by a special steel alloy and the more solid construction. The thickness of the Magura Storm discs, at just 2 mm, ensures minimal pad wear and a quiet, smooth ride with maximum stability

Magura warranty:

Naturally, Magura also provides the well-known 5-year leak-proof guarantee for the new brakes.

Magura MT Trail Sport disc brake technology

• Colour: Black logo on lever and caliper
• Application: XC - Race, up to Enduro
• Technology: Fully hydraulic high-pressure disc brake with integrated reservoir.
• Brake system: Two-piston fixed caliper with automatic pad adjustment, brake disc runs without rubbing.
• Brake lever: Carbotecture lever, radial piston, aluminium HC single-finger brake lever, lever reach adjustment.
• Brake caliper: Post Mount 74/6
• Easybleed Technology for easy bleeding
• Hollow Pin Technology
• Brake hose 100/200 cm
• Brake disc: none
• Piston diameter: Brake lever: 10.5 mm,
• Brake caliper: 4x22 mm Braking force: 6.2 m/s, DIN 79100
• Oil: Magura Royal Blood, mineral oil
• 5-year warranty on the seal integrity of the brake lever and cylinder.

Contents of Magura MT Trail Sport Disc Brake Set:

Magura MT Trail Sport, front and rear brakes with 1000/2000 mm hose lengths respectively, fully pre-assembled and bled, Storm HC brake discs, size selectable, optional adapters for disc size and mounting, brake pads, screws and small parts required for assembly.

The Magura MT Trail Sport Disc is supplied with Post Mount 6 brake calipers.

You can select the appropriate adapter for your frame and brake disc size.

IS 2000: Side mounting. An adapter is always required for fitting the Magura MT Trail Sport; maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Common on older suspension forks and almost all rear triangle frames

Post Mount, PM5: Direct mounting of the Magura MT Trail Sport with 140 mm brake discs without an adapter. Maximum 180 mm, minimum 140 mm disc size. Currently only found on rear triangle frames

Post Mount, PM6: Direct mounting of the Magura MT Trail Sport with 160 mm brake discs without an adapter. Maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.

Post Mount, PM7: Direct mounting without an adapter of the Magura MT Trail Sport with 180mm brake discs. Maximum 203mm, minimum 180mm disc size. 140mm and 160mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.

Post Mount, PM8: Direct mounting without an adapter for the Magura MT Trail Sport with 203mm brake discs. Can only be used with 203mm brake discs. Found only on downhill suspension forks and frames

Herstellerinformation: Magura, Stuttgarter Straße 48, 72574 Bad Urach, Germany, http://www.magura.com