Shimano Dura-Ace BR-R9110 brake

The new DURA-ACE is the answer to the question asked by many professionals and ambitious amateurs: whether and how the current, already immensely high level of performance could be raised even further. Every single DURA-ACE R9100 component is designed to work together with all other components in the system with maximum efficiency. This clearly demonstrates the core of Shimano’s philosophy of developing components as a system. The result is SYSTEM SUPREMACY – the superiority of the system over the sum of its parts.

Dura Ace Direct Mount BR-R9110 Brake Body

The Dura-Ace brakes for frames with direct mount on the fork. The integrated design of the Dura-Ace BR 9010 brakes for aero frames ensures a clean look on the road bike. The compact design and titanium bolts reduce the weight to 280 grams for the brake set. The rim brakes are characterised by further optimisation in terms of braking performance and controllability. They impress with their performance and offer an exceptionally balanced ratio between stiffness, low weight and high deceleration performance. Their sleek design is not only visually appealing but also allows for greater clearance for tyres up to 28C. This optimised performance was achieved, among other things, by reducing flex within the brake caliper by 43 per cent. The Direct Mount brakes also enable aerodynamically favourable integration of the brakes into aero road bikes.

Shimano Dura Ace BR-R9110 Direct Mount technology:

• cold-forged brake arms
• symmetrical dual-pivot technology
• coated bushings
• Max. tyre width: 28 mm
• High-quality pivot bearings
• Max. brake width 49 mm
• R55C4 brake pads for carbon rims
• Weight: Front: approx. 153 g - Rear: approx. 127 g

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com