Campa Super Record WLR Power Meter Crankset

The Campagnolo Super Record power meter crankset with titanium axle for the Super Record Wireless components. Take your performance to a whole new level.

Campagnolo Super Record WRL 12s Power Meter Crank Technology and dimensions:

• HPPM 16 strain gauges with a gyroscope sensor
• Calculates and transmits the current power output every 5 milliseconds.
• Battery lasts for over a month
• Charging time: 4 hours
• Calibration via the My Campy 3.0 app
• Accuracy: +/- 1 per cent
• Measuring range: 0 – 4000 watts
• Cadence: max. 250 rpm
• Battery type: Lithium-polymer
• Wireless communication: ANT+ / Bluetooth 2.4 GHz
• Temperature range: -20 – 60 °C operation / 10 – 45 °C charging
• Temperature compensation: internal
• Water resistance rating: IP67 certified
• USB ceramic bearing
• Ultra-Hollow hollow structure
• Titanium Ultra-Torque shaft with Hirt spline
• Aluminium screws
• Highly durable anodised finish
• 4-arm bolt pattern, with separate mounting for large 121mm and small 88mm chainrings
• Chainline 44.5
• Q-factor 148 mm
• For 12-speed chains and drivetrains
• Weight 656 grams (manufacturer’s specification)
• Includes bottom bracket sets with USB ceramic balls
• Compatible bottom bracket cups: Campagnolo Pro Tech (not included)

Campagnolo Super Record WRL Powermeter Crankset:

The new Super Record Wireless 12x2 crankset with power meter: Campagnolo’s iconic design with visible carbon fibre in a crankset designed for maximum precision. The Super Record Wireless crankset with power meter retains the hollow, lightweight structure and uses the Ultra-Torque locking system with a titanium bottom bracket axle to transfer all the force the rider applies to the pedals to the drivetrain.

The force applied to the pedals is measured via a gyroscope, which constantly detects its own position, and via 16 strain gauges. Power measurement is extremely precise, with a tolerance of +/-1 per cent. Thanks to the new Mycampy 3.0 app, you can easily check the battery charge level at any time. A single charge lasts for one month’s use.
The new Super Record Wireless 12x2 crankset with power meter can be charged very easily using the same charging cable as the other components in the groupset. The use of USB ceramic bearings ensures the now familiar smoothness of operation that has become Campagnolo’s trademark.

The ULTRA-TORQUE system completes the specification and ensures that all your power is converted into exceptional performance. Instant and unstoppable acceleration thanks to a titanium axle and lightweight carbon fibre cranks. The chainring has been redesigned for uncompromising efficiency. Every watt of your power is transferred to the road.

Campagnolo HPPM:

High Precision Power Measurement. The power meter crank of the Super Record Wireless series embodies all of Campagnolo’s technical expertise. Reliable measurement results are ensured by high-frequency data acquisition every 5 ms / 200 Hz via 16 strain gauges arranged in a diamond pattern, which record the torque in Nm, as well as an integrated gyroscope that determines the angular velocity in real time. A special algorithm combines the numerous measurement values to achieve an incredibly high level of precision of +/- 1 per cent. A lithium-polymer battery powers the power meter positioned in the crank spider; it uses the same magnetic connector for charging as the other Super Record Wireless electronic components. A full charge takes less than 4 hours and is sufficient for over a month’s use. The My Campy 3.0 app for Android and iOS not only allows you to check the charge status, but also enables you to calibrate the spider-based power meter system in just a few steps.

Campagnolo Super Record Titanium Crankset Axle

The tried-and-tested system with Hirt threading ensures an extremely stable connection between the two titanium axle halves. As the connection point of the axle lies exactly in the centre – and thus in the part of the axle construction subjected to the highest loads – the forces exerted are absorbed optimally. The bolted connection, combined with the increased axle material, reliably prevents twisting, even with stronger and/or heavier riders. Therefore, despite the titanium axle, there are no restrictions regarding rider/system weight.

Campagnolo WRL chainrings

The exclusive design of the zones for shifting the chain up and down. The special profiles of the teeth and the areas for shifting the chain up and down enable precise and rapid shifting of the front derailleur in all conditions. This system allows for effective, smooth and rapid shifting between the chainrings. The chainring mounting system, in which the chainring bolts are screwed directly into the small chainring, allows for quick installation of the individual chainrings. It is lighter and makes this connection stable, rigid and secure. The chainrings are hard-anodised for improved wear resistance and resistance to salt corrosion.

Compatible bottom bracket shells and Campagnolo Pro Tech inner cups:

• BSA 68 mm thread, Pro Tech bearing cups 1.37 x 24 mm, Item No: OC21-PRG
• ITA 70 mm thread Pro Tech cups 36 x 24 mm Item No: OC21-PRI
• T47 thread Pro Tech bearing cups 47 x 68 mm Item No: OC21-T4768
• T47 thread Pro Tech bearing cups 47 x 86 mm Item No: OC21-T4786
• Pressfit BB86 press-fit diameter 41 mm Pro Tech bearing cups 68x41mm, Item No: IC21-PRBB86
• Pressfit BB30 press fit 42 mm Pro Tech bearing cups 68x42mm Item No: IC21-PRBB30
• BB Right press fit 46 mm Pro Tech bearing cups 79 x 46 mm Item No.: IC21-PRBBR
• BB386 Evo press fit 46 mm Pro Tech bearing cups 86.5x46mm Item No: IC21-PRBB386
• Pressfit PF30 Press fit 46 mm Pro Tech bearing cups 68x46mm, Item No: IC21-PRPF30

Herstellerinformation: Campagnolo, Via della Chimica 4, 36100 Vicenza, Italy, https://www.campagnolo.com