Crank Brothers Candy 11 Titanium Pedals
The all-mountain pedals from Crank Brothers, the Candy 11 with a titanium axle, wide aluminium pedal body and new bearings
On the Candy pedals, the Eggbeater mechanism is encased in an aluminium cage. The excellent performance of the Eggbeaters is retained. The clamping mechanism automatically rotates into the correct position. In terms of weight, the Candy cannot quite keep up with the Eggbeaters. However, the Candy Titanium pedal still outperforms almost all other pedals in a weight comparison. Due to the titanium pedal axle, the Candy TI is only approved for riders weighing up to 85 kg. As with all Crank Brothers pedals, the spring tension does not need to be adjusted.
Crank Brothers clamping mechanism
The clamping arms operate like a pair of scissors: the harder you pull on the pedal, the greater the clamping force. This design allows the release force to be kept low without you having to worry about accidentally unclipping from the pedal during sprints or climbs.
Crank Brothers Candy 11 TI Pedals Technology:
- 6-hole/4-bolt titanium axle, forged
- Needle and industrial bearings
- Pedal body, aluminium
- Contact surface 5.8 cm x 5.2 cm
- Spring, gold stainless steel
- Pedal wing 6al/4v titanium
- Foot movement range, 6 degrees
- Height, body 1.9 cm
- Sole clearance 15.2 mm
- Cleats compatible with all standard MTB shoes
- Weight: 226 grams, pair
- Maximum rider weight: 84 kg
Included in delivery: pedals, cleats, screws. The cleats on Crank Brothers pedals are not compatible with the Shimano SPD cleat system.
Herstellerinformation: Crankbrothers, 580 Broadway St, Suite 101, 92651 Laguna Beach, California, United States, https://int.crankbrothers.com | EU contact: Selle Royal Group, Via V. Emanüle 119, 36050 Pozzoleone (VI), Italy, https://selleroyalgroup.com/
