Wolf Tooth Ripsaw Platform Pedals

The Wolf Tooth Ripsaw aluminium pedals feature a sleek, lightweight design with a slightly convex profile. The large, asymmetrically milled aluminium platform provides strong foot support for all-mountain riding, whilst the thin convex profile at the front edge is just 7 mm thick. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, an Igus bushing and a special radial seal to protect the internal components from dirt on the trail.

Wolf Tooth Ripsaw Flat Pedal Technology:

• forged Cromoly steel axle,
• 3 sealed industrial bearings on the outside, igus bearing
• Pedal body made from 6061 aluminium
• replaceable pins
• Standard pin length 3.2 mm
• Contact surface size: Large 118x102 mm
• Height: 17 mm
• Weight: 384 grams (manufacturer’s specification)

If necessary, all pedal components are available as spare parts.

Slim convex profile: The Ripsaw pedals are 12.5 mm thick at the centre and just 7 mm thick at the front and rear edges. This profile is supportive and comfortable for all riders, whilst the performance is exceptionally good for riders who prefer pedals with a mid-foot position or for shoes that lack structure or support. The slightly convex profile of the pedal body is highest at the pedal axle. From there, the shape tapers towards each edge. This profile moulds perfectly to the arch of the foot and provides a strong platform for power transfer.

Extra Grip: On each side of the pedal are 12 4.5 mm stainless steel pins, mounted on the rear of the pedal to provide additional traction. Six additional 4.5 mm pins are supplied with the pedal. Shorter 3 mm pins are available as spare parts to adjust the pedal’s convexity; installing shorter pins at the edges emphasises the convex profile.

Herstellerinformation: Wolftooth, 3100 West Park Drive, 55306 Burnsville, Minnesota, United States, https://wolftoothcomponents.com | Contact EU Cosmic Sports GmbH Leyher Strasse 47, 90763 Fürth, Germany, https://cosmicsports.de