Look Keo Classic 3 Pedals

The entry-level model in the Look Keo pedal range: the Look Keo Classic pedals. These pedals are characterised by their low weight and renowned performance. The bi-injected, honeycomb-shaped tread offers even greater stability and comfort when pedalling. Thanks to its 14 mm long thread, the new Look axle allows the Q-factor to be adjusted by 2 mm using a specific spacer, which is available as a separate part. This enables a change from 53 to 55 mm.

Look Keo Classic 3 Pedal Technology:

• two-piece pedal body
• oversized axle with double-sealed bearings
• two industrial bearings, 18 mm outer and 12 mm inner diameter, plus a needle bearing
• Range of motion with Keo Grip plates in grey: +/- 4.5 degrees
• Release force adjustable from 8–12 Nm
• Axle-to-sole distance: 17.7 mm
• Contact surface width: 53 mm
• Distance between pedal centre and crank arm: 53 mm
• Includes Look Keo Grip cleats in grey
• Weight: 280 g per set

Release torque: 8–12 Nm

The spring tension can be adjusted between 8 and 12 Nm, allowing all users, from beginners to very experienced riders, to select the setting that best suits their discipline.

Large contact area

400 mm The 400 mm contact area guarantees excellent foot stability on the pedal as well as very good pedalling comfort.

WEIGHT: 140 grams. Thanks to its composite body and optimised joints, the Keo Classic 3 is one of the lightest pedals in its category.

KEO Standard

The Keo Standard has been designed to save weight and space in the cleat-pedal combination whilst remaining compatible with all standard shoes on the market. Clipping in and out offers great safety and efficiency.

Q-factor

Thanks to its 14 mm long thread, the new LOOK axle allows the Q-factor to be adjusted by 2 mm using a specific spacer, which is available as a separate part. This enables a change from 53 to 55 mm.

Axle line

An oversize steel axle is used for the Keo Classic 3. It consists of a mini ball bearing (12 mm inner x 18 mm outer) and a needle bearing. A new spacer has been positioned to ensure the bearings and needle are securely seated. This reduces friction to a minimum and makes rotation smoother. Thanks to a new control mechanism when pressing the axle assembly into the body, our pedals are absolutely reliable. LOOK axles are only approved after a rotation test comprising 2 million cycles at 100 rpm, with a load of 90 kg applied to the centre of the pedal and an eccentric rotation involving one impact per revolution. This test goes far beyond the applicable EN14781 standard.

Herstellerinformation: LOOK, 27 Rue du Docteur Léveillé, 58000 Nevers, Bourgogne-Franche-Comté, France, https://www.lookcycle.com