28-inch DT Swiss 240 EXP Straightpull wheel with Mavic C-2132 Aero rim

The lightweight and sturdy high-end road, cyclocross, endurance and gravel rear wheel featuring the 392-gram Mavic C-2132 Aero carbon rim and the DT Swiss 240 EXP Spline hub.

We offer this wheelset with Centre Lock or Disc 6-hole brake disc mounts. The 240 EXP hubs are available in quick-release, thru-axle or Boost thru-axle versions. Thanks to their 21 mm rim width, the Mavic rims are suitable for tyres between 25 and 50 mm wide

Wheel building at TNC-Hamburg:

Hand-built in our specialist workshop. We manufacture these wheels entirely by hand for you, which is why we cannot offer a right of return for them. Thanks to over 30 years’ experience in wheel building, we extract the optimum in concentricity, durability and stiffness from the materials. These wheels are, of course, tested multiple times, and we also pre-load the spokes in both the transverse and longitudinal directions. This eliminates the need for re-truing over a long period of time. We use DT Swiss spokes exclusively. These ensure outstanding durability of the wheelsets. For DH and Enduro use, we recommend brass nipples.

Included in delivery:

• Rear wheel fully laced in our workshop and hand-trued with a DT 240 EXP straight-pull hub, DT spokes, DT nipples as selected and a Mavic C-2132 carbon rim.
• Excludes rim tape and valve

DT Swiss 240 EXP Straightpull rear hub technology:

• Suitable for MTB, road bike; cyclocross, gravel, touring
• Housing material: Aluminium
• EXP Ratchet freehub body: Aluminium with 2 ratchet pinhubs, specially coated
• Axle: Aluminium
• Stainless steel ball bearings
• Seal system: non-contact
• Weight from 237 grams
• Brake disc mount: Centerlock or 6-bolt disc
• Available rear hubs
  • Quick-release mounting 10x135 mm
  • Thru-axle mounting 12x142 mm
  • Boost thru-axle mounting 12x148 mm
• Available freehub bodies
  • HG11 for Shimano 8–12-speed and SRAM 8–11-speed road bike cassettes
  • XDR for SRAM 12-speed road bike and SRAM 11 + 12-speed MTB cassettes
  • ED for Campagnolo 10–12-speed road bike cassettes
  • N3W for Campagnolo 13-speed road bike / gravel cassettes
  • HG10 for Shimano 8–11-speed and SRAM 8–10-speed MTB cassettes
  • XD for SRAM 11- and 12-speed MTB cassettes
  • Micro Spline for Shimano 12-speed MTB cassettes

Mavic C-2132 Carbon Disc Rims – Specifications and Dimensions:

• 28 inches / ETRTO: 622x21TC / 700 C
• Rim height: 32 mm
• Spoke hole width 21 mm
• ERD 575 mm
• Full carbon rim, 100% unidirectional carbon fibre
• Rim type: Hooked / Crotchet tubeless, TC
• Recommended tyre widths: 25–50 mm
• Valve hole 6.5 mm
• Recommended spoke nipple length 14 mm
• Weight: 392 grams (manufacturer’s specification)

DT Swiss 240 EXP hubs:

The DT Swiss 240 EXP straight-pull hubs offer minimal weight combined with exceptional durability – a rarity in hub construction. The DT Swiss 240 EXP hubs feature low-maintenance stainless steel ball bearings. The patented freehub body operates with interlocking toothed discs, ensuring loss-free power transmission. Straightpull refers to straight, non-offset spokes. Thanks to this technology, it is possible to achieve an ideal balance between weight and stability. The straightpull spokes allow for very precise alignment and optimised positioning within the wheel, resulting in a stiffer and more responsive wheel.

Mavic C2132 Carbon Rim

The high-end C-2132 carbon rims from Mavic for road and gravel use. Aero profile with 32 mm height, 21 mm internal rim width, weighing 392 grams, Adaptive Layup, hooked tubeless ready, suitable for road bikes and also for wide gravel tyres. Available in 24-hole and 28-hole versions.

The super-light full-carbon rim with an aerodynamic NACA profile, 32 mm height and 21 mm rim width is not only very light but also very stable. Its range of use extends from classic road racing to tough cross-country and gravel riding.

DT Competition spokes:

The double cold-forged spoke made from rust-proof 18/10 chrome-nickel steel with a tapered middle section for robust, lightweight wheelsets. We recommend these spokes for virtually all wheelsets. Extremely durable and sufficiently lightweight, DT Competition spokes enable wheelbuilding of the highest standard. Thanks to the tapered middle section, the spokes absorb movement in the wheel exceptionally well, without compromising on lateral stiffness or durability. Weight with nipple approx. 7 grams.

DT Competition Race spokes:

Just as versatile as the bent version of the DT Competition spoke, but as a straight spoke. They are optimally matched to the new straight-pull hubs and offer even greater durability compared to the conventional DT Competition spoke. Thanks to the extra-thin middle section, they save a further 35 g per wheel compared to the already lightweight DT Competition, whilst offering almost the same stiffness and durability.

DT Swiss Aero Comp spokes:

Designed for stable, laterally stiff yet aerodynamic wheelsets, the DT Swiss Aero Comp spoke is cold-forged in the middle section, making it lighter and stronger. In a further complex process, it is flat-forged to optimise aerodynamic properties whilst simultaneously increasing material strength. The DT Aero Comp guarantees a balanced ratio of stiffness, aerodynamics and durability.

DT Swiss Aero Lite spokes:

The DT Swiss Aerolite spoke is flatter and lighter than any other; the DT Swiss Aerolite spoke features an aerodynamic flat profile and is extremely lightweight. Thanks to the 0.9 x 2.3 mm aerodynamic mid-section, this spoke can be fitted to all standard hubs. The Cold Forging Technology (CFT) developed by DT Swiss makes the reduced and forged DT Aerolite the lightest stainless steel spoke and gives it excellent mechanical properties. Particularly suitable for super-light and fast road or cross-country wheelsets. 64 DT Aerolite spokes weigh an incredible 278 g at a length of 264 mm. Weight per spoke at 264 mm length: 4.31 grams

DT Swiss Revolite spokes:

Completely redesigned with a 2 mm spoke head and 2 mm spoke thread, and aerodynamically tapered to 1.3 mm at the centre, the Revolite is the stable all-round spoke. The DT Revolite is the ideal choice for riders looking for a spoke that combines durability with low weight. Double cold-forged spoke made from rust-proof 18/10 chrome-nickel steel with a 1.3 mm thick and 1.58 mm wide semi-aero centre section.

DT Squorx spoke nipples:

The DT Swiss Squorx Pro Head nipple combines ease of installation with light weight thanks to the DT Pro Head design, combined with an additional Torx and square tool socket. The Torx socket provides a larger contact area during wheel building, ensuring that the force from the tool is better distributed across the nipple. The spherical contact area within the rim guarantees perfect alignment with the spoke.

Herstellerinformation: