DT Swiss E 1900 Spline wheel

The affordable freeride and enduro wheels, DT Swiss E 1900 Spline 30, in the new version featuring the Ratchet LN freehub system. Thanks to the DT Swiss hubs with Swiss precision ball bearings and the lightweight, high-strength rims, the E 1900 wheels offer high stability combined with a low weight. Built for tough enduro use, tyres up to 3.0” wide can be fitted. The legendary reliability of DT Swiss hubs and straight-pull lacing ensure long-lasting riding enjoyment. Approved for a system weight of up to 130 kg

DT Swiss 1900 Spline hubs:

The DT Swiss straight-pull hub shells of the Spline wheelsets require minimal material, allowing them to be constructed to be lightweight yet stable. With the optimised hub body, specifically designed for extreme braking forces, and the reinforced flange, DT Swiss provides the perfect foundation for extra-stable wheelsets. The hubs on the Spline wheelsets feature a Centerlock brake disc mount; adapters for 6-bolt disc brake discs are included in the scope of delivery.

Boost hub standard:

The thru-axle standard requires new hubs. The wider hub shell with the flanges positioned further out enables wheelsets with greater lateral stiffness. On Boost 1 hubs, the brake disc mount is also positioned further out. Consequently, these hubs cannot be fitted to frames with the narrower mounting dimension.

DT Swiss E 1900 Spline rims:

Built for tough freeride and enduro use, the DT Swiss E 1900 rims with a 30 mm rim width offer maximum stability combined with low weight. Designed for tyres ranging from 2.2 to 3.0 inches in width, the DT Swiss Spline rims are ideally suited for upgrading with a tubeless kit thanks to their new, extra-sturdy rim spokes. Tubeless rim tape and valve are included

DT Swiss Champion Straight Pull Spokes:

To achieve a good balance between weight and stability, Champion straight-pull spokes are used in Spline wheelsets. They are more stable than conventional spokes yet can still be trued and replaced using standard tools. The straight-pull lacing allows for precise placement and alignment of the spokes. This optimises wheel stiffness and eliminates any unwanted stress peaks.

DT Swiss E 1900 Spline 27.5-inch wheel specifications:

• 27.5-inch ETRTO: 584 x 30
• Rims: Aluminium tubeless-ready
• Rim dimensions: Inner width 30 mm, outer width 35 mm, height 21 mm
• Hub with steel ball bearings
• Rtchet LN freehub system
• DT Swiss Comp Straight Pull spokes: cold-forged round spokes
• Nipples: DT Pro Lock brass nipples
• Lacing pattern: 3-cross
• Number of spokes: 28 per wheel
• Maximum tyre width 3.0
• Required rim tape width: 32 mm
• Brake disc mount: Disc Centerlock
• Boost front hub: 110 x 15 mm clamping width for 15 mm Boost thru-axle mounting, not convertible
• Weight approx. front wheel: 955 grams, manufacturer’s specification
• Maximum recommended system weight: 130 kg
• ASTM classification 4

Contents DT Swiss E 1900 Spline 30 wheelset:

DT E 1900 Spline front wheel, Boost end caps, tubeless valve

Herstellerinformation: DT Swiss, Längfeldweg 101, 2504 Biel, Bern, Switzerland, https://www.dtswiss.com/