E-bike Mullet wheelset Mavic E Crossride 1

The new affordable and extra-robust Mavic E-Crossride enduro and trail e-bike wheels with Classic hubs, 32 J-bend spokes and 30 mm flange width, designed for high-torque e-bikes and maximum riding enjoyment. Approved for a system weight of up to 150 kg

Included

• Mavic E-Crossride 1, front wheel, 29-inch, end stops as selected, tubeless rim tape
• Mavic E-Crossride 1, rear wheel, 27.5-inch, freehub body as selected, tubeless rim tape

Mavic E-Crossride 1 e-bike wheel technology and dimensions:

• 29/27.5-inch, ETRTO 622/584x30, 700C/650B
• Application: E-bikes, All Mountain, Trail, Enduro
• Classic hub: aluminium body, sealed industrial bearings
• Rim width: 30 mm
• Rim: Aluminium
• J-bend spokes: 32 steel spokes
• Front wheel: Boost 15x110 mm thru-axle, convertible to torque caps
• Rear wheel: Boost 12x148 mm thru-axle
• Instant Drive 360 sprocket freehub body, available as
  • HG10 freehub body for Shimano MTB cassettes 8 + 9 + 10 + 11-speed and Sram MTB cassettes 8 + 9 + 10-speed
  • SRAM XD freehub body for SRAM 11- and 12-speed XG MTB cassettes
  • Micro Spline freehub body for Shimano 12-speed MTB cassettes
• Weight approx. set 2220 grams, front wheel 1075 grams, rear wheel 1185 grams Manufacturer’s specification
• Minimum tyre size: width 52 mm – max. pressure 2.95 bar/43 PSI
• Maximum tyre size: width 76 mm – max. pressure 2.45 bar/36 PSI
• ASTM Category 3: Enduro and trail racing
• Maximum recommended system weight: 150 kg

Mavic E Crossride 1 Application:

E-bikes, All Mountain, Trail Enduro. Suitable for use with disc brakes only. Approved by Mavic for riders and bikes up to 150 kg. These wheels can be used with genuine UST tyres, tubeless-ready tyres and standard tyre-inner tube combinations.

Torque Caps:

The wheel mount on many current RockShox suspension forks is designed for Torque Cups. These provide a significantly larger contact surface for the hubs, thereby increasing the stiffness of the suspension fork/wheel system. Torque Cups have a diameter of 31 mm, whereas standard cups are 22 mm.

Mavic E Crossride 1 rims:

The wide rims with a 30 mm rim width are made from high-strength Maxtal aluminium, making them lightweight and, thanks to their asymmetrical spoke pattern, very stiff laterally.

These rims, specially developed for use on e-bikes, are particularly robust. The Crossride 1 rims are suitable for UST, tubeless tyres, tubeless-ready tyres and standard tyres with an additional inner tube.

Hookless Tubeless TSS:

Hookless Tubeless or Tubeless Straight Side (standard abbreviation TSS) describe the rim construction. Tubeless-compatible rims can be ridden without an inner tube, but a setup with an inner tube is also possible. Hookless or Straight Side describes the shape of the rim flange, which in this case is straight and designed without the classic hook. This design offers advantages in terms of greater impact resistance for carbon rim flanges and allows tyre pressures of up to 5 bar.

Mavic Crossride 1 Spokes:

32 high-strength J-bend steel spokes per wheel offer very high strength and durability.

Mavic Classic E-Bike Hub:

The new Classic hubs for e-bike use, featuring a high-flange design and 32 classic J-bend spokes. This guarantees maximum durability and lateral stiffness. The Instant Drive 360 freehub system is lightweight and ensures rapid power transfer with an engagement angle of just 9 degrees. A large, contact-free rubber seal reduces friction. A radial seal ensures low friction at high speeds and perfect water resistance. This freehub body is easy to convert and is available as an HG10 version for Shimano 8-11-speed / Sram 8-10-speed, Sram XD 11- and 12-speed, and Shimano 12-speed Micro Spline.

Herstellerinformation: MAVIC GROUP SAS, Parc Altais, 44 Rue Saturne, 74650 CHAVANO, https://mavic.com