Wheel: Mavic Deemax Park

For all kinds of gravity riding, the new Mavic Deemax Park. Super-robust rims with Pinch Flat Protection, 30 mm rim width and low-maintenance Instant Drive Classic hubs. This rock-solid wheelset takes the worry out of riding, so you can enjoy what matters most: the riding experience.

Mavic Deemax Park Boost 12x148mm rear wheel:

The Deemax Boost rear hub with a 12x148 mm mounting dimension for Boost rear ends. These Boost rear wheels are only compatible with frames featuring Boost thru-axles and cannot be converted.

Mavic Deemax Park wheel technology:

• 29-inch ETRTO 622x30
• Recommended tyre width: 2.35 to 3.0 inches
• Hub: Aluminium body, sealed industrial bearings
• Rim width: 30 mm
• Rim: S6000 aluminium, welded extra-reinforced rim stubs
• Spokes: 32 stainless steel spokes
• Rear wheel: Boost 12x148 mm thru-axle
• Brake disc mount: IS Disc 6-hole
• Instant Drive 360-tooth freehub body, available as
  • HG10 freehub body for Shimano MTB cassettes 8 + 9 + 10 + 11-speed and Sram MTB cassettes 8 + 9 + 10-speed
  • SRAM XD freehub body for SRAM 11- and 12-speed XG MTB cassettes
  • Micro Spline freehub body for Shimano 12-speed MTB cassettes
• Weight approx. front wheel 1185 grams, rear wheel 1328 grams, manufacturer’s specification
• Maximum recommended system weight: 150 kg
• Mavic ASTM Category 5: for use on extreme terrain, particularly downhill

Scope of delivery for Mavic Deemax Park wheelset:

• Mavic E Deemax Park rear wheel, end caps for 12x148mm thru-axle assembly, tubeless rim tape, tubeless valve

Mavic Deemax Park rims:

The wide rims (30 mm rim width) feature a triangular profile to absorb impacts and improve lateral stiffness. This gives you perfect control over your chosen line at all times. The new, wider central channel in the rim bed makes tyre fitting easier, even with the toughest and widest enduro and downhill tyres. Thanks to Pinch Flat Protection (PFP) technology, the tyre’s resistance to punctures increases by 20 per cent.

Mavic Deemax spokes:

The 28 curved spokes are ultra-sturdy, yet easy to replace if necessary. They are laced into the robust Mavic Classic hubs, which feature QRM Auto automatic bearing preload and the proven Instant Drive 360 freehub mechanism. Low maintenance means more time on the trail. All necessary spare parts are readily available.

Mavic Instant Drive 360 freehub body

The Instant Drive 360 freehub system is super-light and ensures rapid engagement with a contact angle of just 9 degrees. A large, non-contact rubber seal reduces friction. And a wide selection of axle stubs ensures compatibility with many mounting standards. The oversized aluminium axle and the hardened aluminium freehub body save 40 g. Two pawls ensure fast and loss-free engagement. A radial seal guarantees low friction at high speeds and perfect water resistance. This freehub body is easy to convert and is available as an HG10 version for Shimano 8-11-speed / SRAM 8-10-speed, SRAM XD 11- and 12-speed, and Shimano 12-speed Micro Spline

Mavic Deemax Park Application:

Bike park, trail, enduro and DH. Suitable for use with disc brakes only. Approved by Mavic for riders up to 180 kg. These wheels can be ridden with genuine UST tyres, tubeless-ready tyres and also standard tyre-inner tube combinations.

Mavic Deemax wheel technology:

• Mavic QRM Auto: Mavic’s top-of-the-range bearing technology: featuring a double seal and extremely dimensionally stable, self-aligning, and exceptionally torsionally rigid and durable, perfect for the long-lasting support of Mavic hubs.
• Mavic Instant Drive freehub body: the Instant Drive 360 freehub system is super-light and ensures rapid power transfer with a mere 9-degree engagement angle. A large, contact-free rubber seal reduces friction. And a wide selection of axle stubs ensures compatibility with many mounting standards. The oversized aluminium axle and hardened freehub body save 40 g. Two pawls ensure fast and loss-free power transfer. A radial seal guarantees low friction at high speeds and perfect water resistance. This freehub body is easy to convert and is available as an HG10 version for Shimano and SRAM 8–11-speed, SRAM XD 11-speed and 12-speed XG.
• Mavic SRS: Spoke Retention System. The spoke seats on the hub body are specially milled to ensure the spoke head remains firmly anchored even under extreme conditions. Yet the spoke still has enough play to provide sufficient flexibility on rough terrain. Spokes remain securely anchored even under the harshest frontal loads. The wheel still offers sufficient flexibility.
• Mavic SUP: Soude Usine Process. A welded rim joint is more stable, prevents any brake judder and makes it easier to lace and true a perfect wheel.
• Pinch Flat Protection: the contact surface of the rim flanges is particularly large, significantly reducing the risk of cuts and punctures to the tyre

Compatible Instant Drive 360 freehub body:

• HG10 aluminium freehub for MTB cassettes, compatible with Shimano 8–11-speed / SRAM 8–10-speed. Item no.: V3480101
• HG10 steel freehub for MTB cassettes, compatible with Shimano 8–11-speed / 8–10-speed cassettes. Item no.: V3790101
• Micro Spline aluminium freehub for Shimano 12-speed MTB cassettes, 12-speed compatible only Item No: V3990101
• Micro Spline steel freehub for Shimano 12-speed MTB cassettes, 12-speed compatible only Item No: A00090231
• SRAM XD freehub for SRAM XG MTB cassettes, 11 + 12-speed compatible Item No.: V3740101

Herstellerinformation: MAVIC GROUP SAS, Parc Altais, 44 Rue Saturne, 74650 CHAVANO, https://mavic.com