Stans Notubes Flow S2 E-Sync hubs + Flow S2 rims

The e-bike, trail, all-mountain, enduro and DH wheelsets from NoTubes featuring E-Sync S hubs and sturdy 33 mm wide asymmetrical Flow S2 rims with a 30 mm rim width for tyres up to 2.6 inches wide.

Stan Notubes E-Sync Boost hubs

The extra-robust E-Sync S hubs from Stans Notubes, approved for e-bike use. Naturally, the wheelsets are also ideal for trail and enduro use. The E-Sync hubs, designed to handle the higher torque and loads of e-bikes, feature a quick 8.18-tooth engagement and a 47 per cent higher torque rating than previous Neo hubs. Heavy-duty chromoly axles and bearings from Enduro-Bearings, including a double-row freehub bearing. The reinforced hub design distributes the load away from the bearings. The E-Sync end caps and freehub bodies are compatible with earlier Neo hubs.

Stan’s Notubes Flow S2 rim:

The S2 rims are made from 6061 aluminium with a durable sleeve joint at the rim joint and stainless steel rim eyelets. They are based on Stan’s proven conventional symmetrical Bead Socket Technology for easy inflation.

Experience gained from successful World Cup DH use, combined with the wide 30 mm Stans WideRide rim width, results in outstanding tyre stability when cornering hard at virtually any speed. With the WideRight System introduced by Stans NoTubes, the rim width increases to 30 millimetres – for even better tyre support and full volume development. Inspired by Stans carbon rims, the new rim profile, combined with the new 6069 aluminium alloy, increases lateral stiffness and impact resistance whilst reducing the risk of snake bites.

The Stans NoTubes rims are perfectly designed, thanks to special rim flanges for fitting tubeless tyres. Thanks to the wide rim bed, the tyre is guided superbly and offers excellent rolling resistance.

Front hub Boost QR 15x110mm standard:

This new thru-axle standard requires new hubs. Compatible only with forks with a Boost 15x110 mm mounting dimension. The wider hub shell with the flanges positioned further out allows for wheelsets with greater lateral stiffness. On Boost hubs, the brake disc mount is also positioned further out. Therefore, these hubs cannot be fitted to forks with a QR15x100 mm mounting dimension.

Notubes BST

Notubes’ Bead Socket Technology. This special rim design features a wide rim bed with a low flange for high tyre stability and full tyre volume development. The BST technology improves air retention in tubeless systems, results in less rotating mass and virtually increases the effective rim width compared to competitors. A wide rim also reduces tyre flexing in corners and allows the tyre to be ridden at lower pressures. The ZTR rims are fully tubeless-compatible when used with rim tape and a valve.

Stan Notube spokes:

The black stainless steel spokes used by Stan’s are highly durable and allow for easy repair or replacement should the need arise.

Stan’s NoTube Tubeless

Stan’s yellow rim tape is included

Stans NoTubes Flow S2 wheel technology:

• Wheel size
• 29 inches ETRTO 622
• Rim
• Rim: Flow S2 BST Disc
• Rim material: 6061 aluminium alloy
• Rim height: 18.2 mm
• Outer rim width: 34 mm
• Inner rim width: 30 mm
• Maximum recommended tyre pressure: 2.8 bar
• Recommended tyre widths: 2.3 to 2.6
• Hubs: E-Sync S
• Industrial bearings: Enduro Bearings
• Boost front wheel hub: QR 15x110 mm thru-axle mount, not convertible
• Spokes
• Sapim Race black stainless steel 2.0x1.65x2.0
• Nipples Aluminium Double Square
• Front 32-hole, 3-cross lacing
• Rear 32 holes, 3-cross lacing
• Weight:
• Front wheel approx. 1000 grams, rim 583 grams, manufacturer’s specification
• Maximum recommended rider weight 113 kg

Contents of delivery for Stans NoTubes Flow S2 wheel:

NoTubes Flow S2 Boost front wheel, tubeless rim tape

Herstellerinformation: Stans NoTubes, 202 Daniel Zenker Dr., 14814 Big Flats, NY, United States, https://stans.com | EU contact: Hermann Hartje KG, Deichstr. 120-122, 27318 Hoya, Germany, https://hartje.de