Shimano TL-FC33 tool, 1/2-inch socket and 32 mm open-end spanner, for Hollowtech II, X-Type, MegaExo and SRAM GPX bottom brackets with a 44 mm outer diameter and Centerlock lock rings

The Shimano Chainring Screw Tool TL-FC-22

Shimano TL FC16 crank bolt tool, for crank bolts with 8.5 mm and 16 mm thread lengths

The inner bearing wrench for Ocatlink and ISIS bearings.

Shimano TL FC34 bottom bracket tool for Shimano DURA-ACE BB 9000, BB R9100, XTR BB 93 bottom brackets with 40.5 mm outer diameter cup

Shimano bottom bracket tool TL-UN66 for Octalink

Shimano TL UN74 S bottom bracket tool for Shimano Octalink bottom brackets with internal gear.

Shimano TL FC36 bottom bracket tool, for the assembly and disassembly of Hollowtech II cranksets and bottom brackets with a 44 mm outer diameter and Centerlock lock rings

Shimano Adapter Tool TL FC24 for DURA-ACE SM BB9000, BB R9100, XTR BB 93 bottom brackets with 40.5 mm outer diameter cup

Shimano adapter tool TL FC25 for Ultegra SM BBR60, Deore XT BB MT800 bottom bracket with 34 mm outer diameter of the bearing cups

Shimano chainring tool TL-FC23 for chainring bolts, Torx T30, 5 mm Allen key

Shimano TL FC41 tool for 12-speed chainrings, spider and lockring

Race Face bottom bracket tool for Cinch 30 BSA bottom brackets, CINCH Wrench Bottom Bracket Tool

Cyclus Snap.in SN.12.I bottom bracket tool for BSA30 Race Face Chinch, Sram Dub and Rotor bottom brackets with an outer diameter of 44 mm

Shimano TL FC37 bottom bracket tool 34 mm for Ultegra SM BBR60, Deore XT BB MT800 bottom bracket

The Pedros hex key set with ball-end heads.

The Pedros Equalizer Pro 2 pedal wrench in the workshop version.

The Pedro's 8 mm Allen key.

Pedro's Y-shaped Allen keys: 2.5 mm, 3 mm, black and yellow

Pedro’s Adjustable Wrench, 250 mm long for optimal leverage.

Pedro’s Allen key, 6 mm.

Pedro’s Y Torx keys, T10, T25, T30, colour: grey-yellow

Threadlocker, Loctite 243, medium strength, 50 ml bottle

Multifunction tool, Lezyne RAP II Series Model 8, aluminium side plates, colour: black

The multi-spoke nipple wrench from Pedros

Shimano TL-LR10 lockring tool for all Shimano and SRAM cassettes and Centerlock brake discs

Pedro's lockring tool for all Shimano and SRAM cassettes and Centerlock brake discs

Lockring tool, Pedro's cassette retainer with guide pin.

One tool kit for cassette assembly and disassembly, including a chain whip and a puller with an assembly arm.

Pedro’s cassette puller for Campagnolo cassettes, square bottom bracket, without pin

Shimano Lockring Tool TL LR15 for cassette and Centerlock lockrings

Shimano Chain Whip TL SR 24

Chainring removal tool, for removing SRAM Thread Mount chainrings

Chain wear gauge, Sram Chain Wear Check Tool

Per lockring: tool for cassette assembly and disassembly; puller with mounting arm.

Pro Tool Chain Whip

Pro Tool Chain Retainer for 10 or 11-speed sprockets

Per tool: chain retainer for 10 or 11 sprockets plus puller

Multifunction tool, Lezyne RAP II Series Model 12, aluminium side plates, colour: black

Multifunction tool, Lezyne RAP II Series Model 12, aluminium side plates, colour: black

Multifunction tool, Lezyne RAP II Series Model 18, aluminium side plates, colour: black

KMC MissingLink Remover chain lock pliers for opening chain locks

Multifunction tool, Lezyne RAP II Series Model 19 CO2, aluminium side plates, colour: black

Torque wrench, Contec TFM Torch 1/4-inch socket, including Allen and Torx bits

Contec TFM Match torque wrench including Allen, Torx and screwdriver bits

Per torque wrench, 1/4-inch drive, including bits: Chrome-vanadium steel sockets in sizes M3, M4, M5, M6, T25 and T30, plus extension

Bike Service BS80080 torque wrench with a 1/4-inch drive and a scale display in a window.

Assembly paste Assembly Pro Dynamic Bike Care 80 ml

Bike Service BS80081 torque wrench with 3/8-inch drive and a scale display in a window.

Assembly paste Assembly Pro Dynamic Bike Care 500ml