Filling syringe for sealant

The Caffelatex Injector enables the controlled, quick and clean injection of the sealant through the valve. It works with both Presta valves (with or without removing the valve mechanism) and Schrader valves, and comes with a long plastic tube to make it easier to use.

• Works with Presta and Schrader valves
• Durable with proper care; clean after use

First, deflate the tyre completely. With the valve positioned horizontally at 3 or 9 o’clock, pull the syringe plunger out completely and connect the syringe tube and the valve using the correct adapter. Once connected, fill the syringe with the desired amount of Caffelatex whilst holding it upright, then push the plunger in so that the sealant can flow through the valve with gentle pressure. IMPORTANT: To ensure proper functioning over a longer period, you must wash every part of the Caffelatex Injector thoroughly with water immediately after use. The maximum capacity of the syringe is 100 ml.

Herstellerinformation: Effetto Mariposa, Via alla Stampa 5a, 6965 Lugano, Ticino, Switzerland, http://www.effettomariposa.com/