Brake caliper adapter Sram 20P
The adapter for mounting:
- 220 mm brake discs on Post Mount 8 forks/frames
- 200 mm brake discs on Post Mount 7 forks/frames
These adapters are compatible with Sram Maven, Code, Guide, Level, G2 and Avid disc brakes with standard calipers
SRAM standard calipers:
The calipers of the Maven, Code, G2, Guide and Level brakes comply with the standard Post Mount specification and are fitted without additional washers. Alternatively, adapters from other manufacturers may also be used
The different frame and fork mounts
IS 2000: Side-mounted. An adapter is always required to mount the brake caliper; maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Found on older suspension forks and almost all rear triangle frames
Post Mount, PM5: Direct mounting of the brake caliper without an adapter, using 140 mm brake discs. Maximum 180 mm, minimum 140 mm disc size. Currently found only on rear triangle frames
Post Mount, PM6: Direct mounting of the brake caliper with 160 mm brake discs without an adapter. Maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.
Post Mount, PM7: Direct mounting of the brake caliper with 180mm brake discs without an adapter. Maximum 203mm, minimum 180mm disc size. 140mm and 160mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.
Post Mount, PM8: Direct mounting of the brake caliper without an adapter, using 203mm brake discs. Can only be used with 203mm brake discs. Found only on downhill suspension forks and frames
Herstellerinformation: SRAM, 1000 W Fulton Market #4, 60607 Chicago, Illinois, United States, http://www.sram.com | Contact EU: SRAM Europe Sales and Services B.V., Paasbosweg 16, 3862 ZS Nijkerk, Netherlands, https://www.sram.com
