Shimano Disc Adapter

The Shimano Disc Adapter SM MA R180 PS can be used to fit

• the rear Post Mount disc brake with a 180 mm rotor on frames with an IS 2000 disc brake mount

The calipers of the current Shimano MTB disc brakes are all manufactured with the Post Mount 6 / 74 mounting.

With the Post Mount 6 standard, the brake caliper is mounted directly. Lateral alignment is possible via the slotted holes in the brake caliper without washers. Using adapters, it is possible to mount the disc brakes on all forks and rear stays.

The various standards for brake caliper mounting

IS 2000: Side-mounted. An adapter is always required to fit the Shimano disc; maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Found on older suspension forks and almost all rear triangle frames

Post Mount, PM5: Direct mounting of the Shimano Disc with 140 mm brake discs without an adapter. Maximum 180 mm, minimum 140 mm disc size. Currently found only on rear stays

Post Mount, PM6: Direct mounting of Shimano Disc brakes with 160 mm discs without an adapter. Maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.

Post Mount, PM7: Direct mounting of Shimano Disc brakes with 180mm discs without an adapter. Maximum 203mm, minimum 180mm disc size. 140mm and 160mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.

Post Mount, PM8: Direct mounting without an adapter for Shimano discs with 203mm brake discs. Can only be used with 203mm brake discs. Found only on downhill suspension forks and frames

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com