Shimano XTR XC M9200 disc brake

The high-end cross-country disc brake featuring the BR-M920 two-piston caliper and the BL-M9200 brake lever with ServoWave technology.

Included:

• Rear disc brake, XTR brake lever (right), BL M9200 L, XTR 2-piston brake caliper, BR M9200, 170 cm hose, SM-BH90-SBM, excluding brake discs and adapters.

Shimano XTR BLM / BRM 9200 disc brake technology and dimensions:

• Brake lever with Servo Wave technology
• Easy Bleed bleeding
• Brake lever clamp for I-Spec direct mount type EV
• Forged magnesium 2-piston caliper, Post Mount
• Straight hose connection
• Approved for brake discs up to 180 mm
• Brake pads with large titanium backing plates, K05Ti-RX
• Brake hose SM-BH90-SS, with straight hose connection Lever and caliper
• Required mineral oil: Shimano Low Viscosity, Part No. ISMLVOIL01M
• Weight: Brake without adapter 270 grams (manufacturer’s specification)
• Recommended brake discs: RT MT900

Shimano XTR BL-M9200 brake lever:

The beautifully designed and elegant BL-M9200 offers all the functions of the modern XTR braking system and is the perfect choice for top-class cross-country racing bikes. In combination with the XTR M9200 brake caliper, the system delivers balanced braking power and excellent modulation across varied terrain.

• Lightweight construction: The magnesium master cylinder and carbon lever body keep the weight down.
• Consistent braking control: The all-new low-viscosity mineral oil ensures a reliable and strong performance curve at all temperatures and on any terrain

Shimano XTR BR-M9200 brake caliper:

The BR-M9200 2-piston brake caliper is SHIMANO’s further-refined, lightest post-mount model and, when paired with the BL-M9200 lever, is at home in the Cross-Country World Cup, whilst combined with the BL-M9220 enduro/trail lever, it is perfectly suited to rougher and steeper trails. Heat-resistant plastic pistons, synthetic resin or metal brake pads and the new low-viscosity mineral oil make the M9200 brake caliper the ideal choice for any scenario where 2-piston brake calipers are required.

• Consistent braking control: The all-new low-viscosity mineral oil ensures a reliable and powerful performance curve at all temperatures and on any terrain.
• Pure XC: Combine the BR-M9200 brake caliper with the BL-M9200 brake lever to create the lightest XC brake in the SHIMANO range.
• Lightweight construction: The magnesium brake caliper body keeps the weight down.
• Clean cable routing: Combine the BR-M9200 brake caliper and the BL-M9220 lever for a tidy look and an ideal balance between braking power and weight.

Shimano I-Spec EV mounting:

The new I-Spec EV system offers a wider adjustment range with 14 mm lateral movement and 60 degrees of rotation. The I-Spec EV mount is not compatible with older I-Spec Type A, Type B or Type II mounts.

The Shimano XTR brake caliper uses the Post Mount standard.

IS 2000: Side-mounted. An adapter is always required for brake fitting, with a maximum of 203 mm, a minimum of 160 mm on the fork and a disc size of 140 mm on the frame. Common on older suspension forks and almost all rear triangle frames

Post Mount, PM5: Direct mounting of the brake without an adapter, using 140 mm brake discs. Maximum 180 mm, minimum 140 mm disc size. Currently found only on rear triangle frames

Post Mount, PM6: Direct mounting of the brake with 160 mm brake discs without an adapter. Maximum 220 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.

Post Mount, PM7: Direct mounting of the brake with 180mm discs without an adapter. Maximum 220mm, minimum 180mm disc size. 140mm and 160mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.

Post Mount, PM8: Direct mounting without an adapter for brakes with 203mm brake discs. Can only be used with 203mm and 220mm brake discs. Only found on downhill suspension forks and frames from

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com