Shimano Saint M 820B disc brake

The top-of-the-range Shimano Saint 820 downhill brake. Featuring the new I Spec B mounting system and the new Servo Wave System, the new Saint Ice Tec brake delivers unbeatable braking performance and optimum modulation.

Included in delivery:

• Shimano Saint front disc brake, with brake pads, 100 cm hose, mounting screws, and nipples and crimp sleeves for hose shortening

Shimano Saint M820 Ice Tec disc brake:

• 4-piston ceramic caliper, 90-degree hose outlet
• Post Mount 6 mounting, compatible with all frames and forks
• Servo Wave brake lever
• Adjustable reach and lever travel I Spec compatible
• High-strength Vinylon brake hose, 170 cm SM-BH90-SBLS
• H03C metal brake pads
• Recommended discs: SMRT86, SMRT81, SMRT SM-RT99
• Weight: 306 grams per brake, excluding discs and adapters

Shimano Saint Brake Lever BL M820B:

Equipped with new Servo Wave technology for reduced play, the Saint brake levers BL M820B are I-Spec compatible; the Shimano Saint SLM 820, XT SLM780BI and XTR 970BI I-Spec shift levers can be fitted without an additional clamp.

Shimano I-Spec mounting:

The Saint BLM 820 B disc brake levers are suitable for direct mounting (I-Spec) with the SLM 820BI shift levers. This mounting system allows for space-saving installation of the shift levers directly onto the brake lever clamp. Shimano changed the I-Spec mount on the 2014 system to Type B. You can recognise this by the addition of the letter B to the lever designation. Older Shimano I-Spec shift levers can be combined with the new brake levers using the new I-Spec adapters: SM-SL98-B, SM-SL78-B and SM-SL82-B.

Shimano Saint BR M820 brake caliper:

The high-performance four-piston brake caliper with ceramic pistons and one-way bleeding delivers impressive braking performance. Thanks to the different response points of the four brake pistons, the new Saint brake can now be modulated wonderfully smoothly despite its extremely high maximum braking power. The new Ice Tec brake pads ensure even greater stability.

The Shimano Saint BRM 820 Disc is supplied with Post Mount 6 brake calipers.

You can select the correct adapter for your fork and brake disc size. For Post Mount 7 and 203 mm discs, we supply the appropriate Magura adapter for the brake, as Shimano does not currently offer a suitable adapter

IS 2000: Side mounting. An adapter is always required to fit the Shimano Saint Disc BMR820; maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Common on older suspension forks and almost all rear triangle designs

Post Mount, PM5: Direct mounting of the Shimano Saint Disc BMR820 with 140 mm brake discs without an adapter. Maximum 180 mm, minimum 140 mm disc size. Currently only found on rear triangle frames

Post Mount, PM6: Direct mounting of the Shimano Saint Disc BMR820 with 160 mm brake discs without an adapter. Maximum 203 mm, minimum 160 mm on the fork and 140 mm disc size on the frame. Currently the most common standard on forks, and on some rear triangle frames.

Post Mount, PM7: Direct mounting without an adapter of the Shimano Saint Disc BMR820 with 180mm brake discs. Maximum 203mm, minimum 180mm disc size. 140 and 160 mm disc sizes are not possible. Found on some enduro suspension forks such as the Magura Thor and on some rear triangle frames such as the Liteville 301.

Post Mount, PM8: Direct mounting without an adapter for the Shimano Saint Disc BMR820 with 203mm brake discs. Can only be used with 203mm brake discs. Found only on downhill suspension forks and frames

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com