Cane Creek 110 Headset

The Cane Creek 110 IS41 headset top and bottom cups for frames with an installation dimensionof 41 mm at the top and bottom of the head tube and forks with a steerer tube diameter of 1 1/8 inch / 28.6 mm at the top and 1 1/8 inch / 30 mm at the bottom.

Cane Creek 110 Headset Specifications and Dimensions:

• Headset: 7075-T6 aluminium, CNC-machined
• Bearings: Stainless steel cartridge bearings with multiple seals
• Top height: 9 mm with cap
• Bottom height: 6.5 mm
• Weight: 80 grams (manufacturer’s specification)
• Contents: Cane Creek headset including end cap and clamp for aluminium / steel forks

Cane Creek Series 110:

With the Series 110, Cane Creek has created an exceptional premium headset that combines maximum functionality with an attractive design. It is manufactured using first-class materials without compromising on functionality, making it the best headset in the Cane Creek range. Available in a wide range of configurations, as upper and lower cups or as a complete headset for almost any fork and head tube configuration.

Cane Creek bearings:

Fitted with high-quality stainless steel cartridge bearings, designed to protect all components from dirt and corrosion through multiple seals. This not only maximises service life but also minimises maintenance intervals. The prerequisites for a worry-free and unobtrusive headset.

IS41/28.6 top thread:

The IS headset is inserted into the top of the head tube; the frame clearance is 41 mm and the fork steerer tube diameter is 1 1/8 inch / 28.6 mm at the top.

IS41/30 bottom thread:

The IS headset is inserted into the head tube at the bottom; the frame clearance is 41 mm and the fork steerer tube diameter is 1 1/8 inches at the bottom. The headset cone requires a 30 mm seat on the fork at the bottom.

IS/Integrated Standard – fully integrated headset:

Headset assemblies designated IS / Integrated Standard are also referred to as fully integrated headsets. These headsets require a frame designed for this purpose with a raceway for the bearings. Integrated Standard refers to the fact that the bearings are inserted into the head tube without bearing cups, and IS44, for example, refers to the installation dimension, outer diameter of the bearings and inner diameter of the bearings in the frame. These headsets do not require any special tools; the frame is already prepared for them.

Herstellerinformation: Cane Creek, 355 Cane Creek Road, 29732 Fletcher, North Carolina, United States, https://www.canecreek.com