Crank Brothers Egg Beater 2 clipless pedals

The Crank Brothers Egg Beater 2 pedals with Enduro Bearings and Igus II bearings. Still not cheap for a whisk, but really good value for a pedal with this excellent functionality and low weight.

As light as the Eggbeater 3 pedal, but significantly cheaper thanks to the cast steel pedal body. These pedals only start to get clogged with mud and dirt when your colleagues have already been struggling with getting on and off for some time.

As with all Crank Brothers pedals, the spring tension does not need to be adjusted. The flat design allows for extreme angles of up to 31 degrees without the pedals bottoming out. The clamping arms work like a pair of scissors: the harder you pull on the pedal, the greater the clamping force. This design keeps the release force low, so you don’t have to worry about accidentally unclipping from the pedal during sprints or climbs.

Included in delivery: Pedals, cleats, screws. The cleats on Crank Brothers pedals can be fitted to all modern MTB shoes, but are not compatible with Shimano SPD pedals.

Crank Brothers Eggbeater 2 Pedal Technology:

• Forged stainless steel axle
• Needle and industrial bearings, Enduro Bearings 686LLU/igus II plain bearings with DSS seal
• Pedal body, cast steel
• Spring, stainless steel
• Foot movement range, 6 degrees
• Height, body 1.9 cm
• Sole clearance 15.2 mm
• Cleats compatible with all standard MTB shoes
• Weight: 272 grams, pair

Herstellerinformation: Crankbrothers, 580 Broadway St, Suite 101, 92651 Laguna Beach, California, United States, https://int.crankbrothers.com | EU contact: Selle Royal Group, Via V. Emanüle 119, 36050 Pozzoleone (VI), Italy, https://selleroyalgroup.com/