DT Swiss 240 EXP Disc Hub Wheel Set plus Stans ZTR Crest
The high-end 28-inch wheelset for gravel use, featuring DT Swiss 240 EXP Classic J Bend hubs and the 399-gram Stans Notube ZTR Crest MK4 rims with a 25 mm rim width, recommended for tyre widths from 35 to 60 mm.
We offer the wheelsets with freehub bodies for Campagnolo ED + N3W, Shimano HG11 + HG10 + Micro Spline, and SRAM XDR + XD cassettes.The DT Swiss 240 EXP hubs are available as thru-axle versions, including Boost, and as quick-release versions. Optionally with 6-bolt disc or Centerlock brake disc mounts
Stans NoTubes ZTR Crest MK4
The legendary Crest is now even better. With a wider rim width and the proven low-profile BST rim bed, the new Crest MK4 rim features a 25 mm rim width. Thanks to the WideRight system introduced by Stans NoTubes, the rim width increases to 25 millimetres, providing even better tyre support and full volume development. Inspired by Stans carbon rims, the new rim profile, combined with the new 6069 aluminium alloy, increases lateral stiffness and impact resistance whilst reducing the risk of snake bites.
DT Swiss 240 EXP hubs:
With the DT Swiss 240 EXP hubs, minimal weight combined with exceptional durability is something of a rarity, particularly in hub construction. The new axle system, with 15 per cent more support width, increases hub stiffness. The ‘EXP’ in the DT Swiss 240 EXP hubs stands for the integration of the gear ring and threaded ring, which reduces the number of components and thus lowers the weight. A single coil spring ensures faster, complete engagement and thus greater reliability. The complete interlocking of the ring gears creates a large contact area and thus low point loads, resulting in superior reliability. The stainless steel ball bearings have proven to be extremely reliable and durable since the introduction of the 240 EXP hubs. The patented freewheel body operates with interlocking toothed discs. This guarantees loss-free power transmission.
Wheel construction at TNC-Hamburg:
We manufacture these wheels entirely by hand for you. Thanks to more than 30 years of experience in wheel building, we extract the optimum in concentricity, durability and stiffness from the material. These wheels are, of course, pre-tensioned multiple times; we also pre-load the spokes in both the radial and tangential directions. This eliminates the need for re-centring over a long period of time. We use DT Swiss spokes exclusively. These ensure outstanding durability of the wheels. For enduro use, we recommend brass nipples.
These wheelsets are custom-made for you, which is why we cannot offer a right of withdrawal for them. Please feel free to enquire about other wheel set configurations. We will then send you a quote.
Included in delivery:
Complete front and rear wheels, laced and trued in our workshop with a DT 240 EXP Classic front hub, Notubes ZTR Crest MK4 rim and DT spokes.
DT Swiss 240 EXP Classic MTB Disc front hub specifications:
- Housing material: Aluminium
- Axle: Aluminium
- Stainless steel industrial ball bearings
- Seal-less sealing system
- Centerlock or 6-bolt disc brake mount
- Weight from 162 grams
- Available as:
- 9x100 mm quick-release mount
- 12x100 mm thru-axle mount
- 15x100 mm thru-axle mount
- Boost 15x110 mm thru-axle mount
DT Swiss 240 EXP rear hub technology:
- Application: Road bike
- Housing material: Aluminium
- Freewheel body: Aluminium with 2 sprockets, specially coated
- Axle: Aluminium
- Stainless steel ball bearings
- Seal-less sealing system
- Centerlock or 6-bolt disc brake mount
- Weight from 219 grams (manufacturer’s specification)
- Available as:
- 10x135 mm quick-release mount
- 12x142 mm thru-axle mount
- Boost 12x148 mm thru-axle mount
Stans NoTubes Crest MK4 rim technology Dimensions:
- 28 inches, ETRTO 622 x 25
- ERD: 601 mm
- Rim dimensions: Outer width 28.4 mm, inner width 25 mm, height 18 mm
- Black anodised
- Aluminium alloy
- Welded rim joint
- Weight: approx. 399 grams
- Applications: Race, Cross Road, Gravel
DT Competition spokes:
The double cold-forged spoke made from rust-resistant 18/10 chrome-nickel steel with a tapered middle section for robust, lightweight wheelsets. We recommend these spokes for virtually all wheelsets. Extremely durable and sufficiently lightweight, DT Competition spokes enable wheel building of the highest standard. Thanks to the tapered section, the spokes absorb movements in the wheel exceptionally well, without compromising lateral stiffness or durability. Weight with nipple approx. 7 grams
DT Swiss Aero Comp spokes:
Designed for stable, laterally stiff yet aerodynamic wheelsets, the DT Swiss Aero Comp spoke in the straight-pull version is first cold-forged in the middle section, making it lighter and stronger. In a further complex process, it is flat-forged to optimise aerodynamic properties whilst simultaneously increasing material strength. The DT Aero Comp guarantees a balanced combination of stiffness, aerodynamics and durability.
DT Swiss Aero Lite spokes:
The DT Swiss Aerolite spoke is flatter and lighter than any other; the DT Swiss Aerolite spoke features an aerodynamic flat profile and is extremely lightweight. Thanks to the 0.9 x 2.3 mm aerodynamic mid-section, this spoke can be fitted to all standard hubs. The Cold Forging Technology (CFT) developed by DT Swiss makes the reduced and forged DT Aerolite the lightest stainless steel spoke and gives it excellent mechanical properties. Particularly suitable for super-light and fast road or cross-country wheelsets. 64 DT Aerolite spokes weigh just an incredible 278 g at a length of 264 mm. Weight per spoke at a length of 264 mm: 4.31 grams
DT Squorx spoke nipples:
The DT Swiss Squorx Pro Head nipple combines ease of installation with light weight thanks to the DT Pro Head shape, combined with an additional Torx and square tool socket. The Torx socket provides a larger contact area during wheel building, ensuring that the force from the tool is better distributed across the nipple. The spherical contact area within the rim guarantees perfect alignment with the spoke.
Herstellerinformation:
