Mavic Deemax DH Mullet wheelset

Developed, tested and proven to meet the demands of World Cup DH racers, the new Mavic Deemax DH wheels now feature a 30 mm rim width for tyre widths from 2.35 to 3.0.

The benchmark among DH wheelsets. Mavic Deemax, designed and developed for DH, Enduro, Gravity and Trail, equipped with ultra-sturdy Deemax oversize hubs, Instant Drive freehub, extra-reinforced rims with a 30 mm rim width and extra-reinforced PFP sidewalls for tyre widths up to 3.0. Approved for a system weight of up to 150 kg and ASTM Class 5, the new Deemax is perfectly suited for DH, Enduro and Gravity

Included in delivery:

• Mavic Deemax 29-inch front wheel, Boost, end caps as selected, tubeless valve, tubeless rim tape
• Mavic Deemax 27.5-inch rear wheel, Boost or Superboost, freehub body as selected, tubeless valve, tubeless rim tape

Mavic Deemax DH Mullet wheel specifications and dimensions:

• 29 / 27.5-inch ETRTO 622x30 / 584x30
• Recommended tyre width: 2.35 to 3.0 inches
• Hub: Aluminium body, sealed industrial bearings, adjustable,
• Rim width: 30 mm
• Rim: Welded MaxTall, extra-reinforced Black Shield Protection rim flanges
• Spokes: 28 stainless steel spokes
• Front wheel: Boost 20x110 mm thru-axle, convertible to Boost 15x110 mm
• Rear wheel: Super Boost 12x157 mm thru-axle
• Brake disc mount: International Standard IS Disc 6-hole
• Instant Drive 360-tooth freehub body, available as
  • HG10 freehub body for Shimano MTB cassettes 8 + 9 + 10 + 11-speed and Sram MTB cassettes 8 + 9 + 10-speed
  • SRAM XD freehub body for SRAM 11- and 12-speed XG MTB cassettes
  • Micro Spline freehub body for Shimano 12-speed MTB cassettes
• Weight approx. set 2070 grams, front wheel 990 grams, rear wheel 1080 grams Manufacturer’s specification
• Minimum tyre size: width 52 mm – max. pressure 2.95 bar/43 PSI
• Maximum tyre size: width 76 mm – max. pressure 2.45 bar/36 PSI
• Mavic ASTM Category 5: for use on extreme terrain, particularly downhill
• Recommended maximum system weight: 150 kg

Mavic Deemax DH Boost 20/15x110mm front wheel:

The Deemax Boost front wheel with 20x110mm Boost thru-axle mounting. These Boost front wheels are only compatible with Boost forks featuring a 20x110mm thru-axle and can be converted to Boost 15x110mm. Not compatible with downhill forks with a 110mm mounting, as these have different hub bodies

Mavic Deemax DH Boost 12x148mm rear wheel:

The Deemax Boost rear hub with 12x148mm Boost thru-axle spacing. These Boost rear wheels are only compatible with frames featuring Boost 148mm thru-axles and cannot be converted. Not compatible with Super Boost frames featuring 12x157mm spacing, as these have wider hub bodies.

Mavic Deemax DH Super Boost 12x157/150 mm rear wheel:

The Deemax Super Boost rear wheel hub with 12x157 mm thru-axle spacing. These Super Boost rear wheels are only compatible with frames featuring Super Boost 157 mm and DH / Boost 12x150 mm spacing. Not compatible with downhill frames featuring 12x148 mm spacing, as these have narrower hub bodies

Mavic Deemax DH Application:

Enduro, Gravity and DH. Suitable for use with disc brakes only. Approved by Mavic for riders and bikes up to 150 kg. These wheels can be ridden with genuine UST tyres, tubeless-ready tyres and also standard tyre-inner tube combinations.

Spare parts for the Mavic Deemax DH 29-inch front wheel:

• Boost end stop 15x110 mm thru-axle fitting, item no.: 12982801
• Boost end stop for 20x110 mm thru-axle mounting, Part No: V2680401
• Boost end cap for Torque Caps 20x110 mm thru-axle mounting, Item No.: V2650401
• Replacement rim, front or rear wheel, 28-hole, height 21 mm, width 35 mm, rim width 30 mm, Item No.: V00094431
• Replacement J-bend stainless steel spokes 299 mm with nipples, Item No: V2387901
• Tubeless rim tape 35 mm green, item no.: V3750101
• Hub bearing type 61805/ 25x37x7 mm for 20 mm axle Item No.: M40179
• Hub axle QRM Road, MTB Boost 20x110 2 x 100 mm Item No.:V2373701

Torque Caps:

The wheel mount on many current RockShox suspension forks is designed for Torque Cups. These provide a significantly larger contact surface for the hubs, thereby increasing the stiffness of the suspension fork/wheel system. Torque Cups have a diameter of 31 mm, whereas standard cups are 22 mm.

Spare parts for the Mavic Deemax DH 27.5-inch rear wheel:

• Boost 12x148 mm thru-axle assembly, Item No: V2510700
• Boost 10x141 mm quick-release assembly, Item No.: V2510800
• Replacement rim, front or rear wheel, 28 holes, height 21 mm, width 35 mm, rim width 30 mm, Item No: V00094509
• Replacement J-bend stainless steel spokes 281 mm with nipples, Item No.: V2388001
• Tubeless rim tape 35 mm green, Item No.: V3750101
• Hub bearing type 6903 / 17x30x7 mm Item No: M40076
• Rear wheel axle kit Boost 148 mm for ID360 Disc 6-hole hub with lockring and cap Item No: V2372201
• Sprocket retainer with retaining ring Item No: V2252701
• Freewheel body seal Part No: V00063631 / V2251601
• Sprocket kit 24 teeth with spring Item No.: V2375201
• Rubber for noise damping Item No.: V2500501
• MTB spring for toothed discs Part No: V2251801
• Bearing cover with shaft washer and circlip Part No: V2373001

Compatible Instant Drive 360 MTB freehub body:

• HG10 aluminium freehub for MTB cassettes, compatible with Shimano 8–11-speed / Sram 8–10-speed, Part No: V3780101
• HG10 steel freehub for MTB cassettes, compatible with Shimano 8–11-speed / 8–10-speed cassettes, Part No: V3790100
• Micro Spline aluminium freehub for Shimano 12-speed MTB cassettes, 12-speed compatible only Item No.: V3990101
• Micro Spline steel freehub for Shimano 12-speed MTB cassettes, 12-speed compatible only Item No: A00090231
• SRAM XD aluminium freehub for SRAM XG MTB cassettes, 11 + 12-speed compatible Item No: V3740101

Mavic Deemax UST Disc rims:

These rims, with a 30 mm rim width made from high-strength Maxtal aluminium, offer excellent lateral stiffness thanks to their asymmetrical spoke pattern. Developed specifically for use on DH bikes, these rims are ultra-stable. The rim flanges are extremely puncture-resistant thanks to Pinch Flat Protection technology. The new Black Shield hardened rims are extra robust and scratch-resistant. Even in the event of punctures, the rims remain black at the damaged point. The rim flange is additionally welded and milled flat. Thanks to the asymmetrical rim design, braking and drive forces are absorbed evenly, which increases the service life. The Deemax rims are suitable for UST, tubeless tyres, Tubeless Ready tyres and standard tyres with an additional inner tube.

Mavic Deemax spokes:

High-strength stainless steel spokes offer very high strength and durability. Classically laced with standard nipples, the wheels can be trued and repaired quickly and easily. This is not insignificant given the intended use.

Mavic Instant Drive 360 Freehub Body

The Instant Drive 360 freehub system is super-light and ensures rapid power transfer with a mere 9-degree engagement angle. A large, contact-free rubber seal reduces friction. And a wide selection of axle stubs ensures compatibility with many mounting standards. The oversized aluminium axle and the hardened aluminium freehub body save 40 g. Two pawls ensure fast and loss-free engagement. A radial seal guarantees low friction at high speeds and perfect water resistance. This freehub body is easy to convert and is available as an HG10 version for Shimano 8-11-speed / SRAM 8-10-speed, SRAM XD 11- and 12-speed, and Shimano 12-speed Micro Spline

Mavic Deemax wheel technology:

• Mavic QRM Auto: Mavic’s top-of-the-range bearing technology: featuring a double seal and extremely dimensionally stable, self-aligning, and exceptionally torsionally rigid and durable, perfect for the long-lasting bearing assembly of Mavic hubs.
• Mavic Instant Drive freehub body: the Instant Drive 360 freehub system is super-light and ensures rapid power transfer with an engagement angle of just 9 degrees. A large, non-contact rubber seal reduces friction. And a wide selection of axle stubs ensures compatibility with many mounting standards. The oversized aluminium axle and the hardened aluminium freehub body save 40 g. Two pawls ensure fast and loss-free power transfer. A radial seal guarantees low friction at high speeds and perfect water resistance. This freehub body is easy to convert and is available as an HG10 version for Shimano and SRAM 8-11-speed, SRAM XD 11-speed and 12-speed XG.
• Mavic SRS: Spoke Retention System. The spoke seats on the hub body are specially milled to ensure the spoke head remains firmly anchored even under extreme conditions. The spoke still has sufficient play to provide adequate flexibility on rough terrain. Spokes remain securely anchored even under the harshest frontal loads. The wheel still offers sufficient flexibility.
• Mavic Black Shield Protection: the reinforced rim flanges are ultra-sturdy and puncture-resistant.
• Mavic Maxtal: This aluminium alloy, manufactured exclusively for Mavic, is 30 per cent stronger than 6106 aluminium. This means Maxtal rims can be super-light yet still sturdy.
• Mavic SUP: Soude Usine Process. A welded rim joint is more stable, prevents any brake judder and makes it easier to lace and true a perfect wheel.

Herstellerinformation: MAVIC GROUP SAS, Parc Altais, 44 Rue Saturne, 74650 CHAVANO, https://mavic.com