Disc Brake Pads SwissStop Disc 31 EXOTherm2

The extremely durable and high-performance pad compound, cooled by an aluminium backing plate with cooling fins: the service life of all components is maximised.

The SwissStop EXOTherm2 disc brake pads with an organic pad compound and cooling fins. The pad compound is applied to an aluminium backing plate, ensuring optimal heat dissipation, minimal fading and maximum service life. The cooling fins reduce the temperature in the pistons, pads and discs: brake fade is minimised.

Compatible with

• 4-piston disc brakes: Avid Elixir Trail, Avid XO Trail, Avid Elixir 9 Trail, Avid Elixir 7 Trail
• 4-piston disc brakes: Sram Guide Ultimate, Sram Guide RCS, Sram Guide RS, Sram Guide R, Sram G2 Ultimate, Sram G2 RSC

SwissStop Disc Type EXOTherm 2 Brake Pad Characteristics

• Maximum pad life
• Extremely durable and high-performance pad compound, cooled by an aluminium backing plate with cooling fins
• Good braking performance in both dry and wet weather conditions.
• The service life of all components is maximised
• Minimal brake fade
• Springs and clips are always included with SwissStop brake pads.

IMPORTANT: The brake pads must be bedded in to achieve optimum braking power and durability

Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
this process 2–3 times.

Step 2: On a steeper descent, let both brakes drag alternately for 10–15 seconds each, stopping almost completely. Repeat
this process 2–3 times.

Pro tip: Break in the rear brake pads on the front wheel. Follow the procedure described above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!

Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de