Disc Brake Pads SwissStop Disc 27 EXOTherm2

SwissStop Exotherm disc pads with cooling fins and an aluminium backing plate, for optimal heat dissipation, minimal fading and maximum service life. The cooling fins reduce the temperature in the pistons, pads and discs, thereby minimising brake fade.

SwissStop Disc Type EXOTherm 2 Brake Pad Characteristics

• Maximum pad service life
• Extremely durable and high-performance pad compound, cooled by an aluminium backing plate with cooling fins
• Good braking performance in both dry and wet weather conditions.
• The service life of all components is maximised
• Minimal brake fade

Compatible with:

• Shimano XTR BR-M9020, BR-M9120 4-piston disc brakes
• Shimano XT BR-M8020, BR-M8120 4-piston disc brakes
• Shimano Saint BR-M820 4-piston disc brakes
• Shimano Zee BR-M640 4-piston disc brakes

IMPORTANT: The brake pads must be bedded in to achieve optimum braking power and durability

Step 1: On a moderately steep descent, apply the front and rear brakes alternately for 20–30 seconds. Repeat
this process 2–3 times.

Step 2: On a steeper descent, apply both brakes alternately for 10–15 seconds at a time, stopping the bike almost completely. Repeat
this process 2–3 times.

Pro tip: Break in the rear brake pads on the front wheel. Follow the procedure described above. Then fit the pads to the rear. On a flat surface, let them run briefly 2–3 times. Caution: Before replacing the pads, ensure they have cooled down sufficiently: risk of burns!

Herstellerinformation: SwissStop, Via Ruchat-Roncati 1, 6850 Mendrisio, Switzerland, https://swissstop.ch | EU contact: MERIDA & CENTURION Germany GmbH, Blumenstraße 49-51, 71106 Magstadt, Germany, https://www.mcg-parts.de