Spare part for Magura Gustav Pro disc brake

Magura Gustav Pro brake lever:

The GUSTAV PRO brake lever integrates perfectly into modern handlebars with a 0-degree hose outlet. With a 7 ml oil volume in the reservoir – almost twice as much as the MT7 – MAGURA has ensured that bleeding is rarely required. It is even ABS-compatible. The new GUSTAV PRO brake lever is based on the HC-W brake lever developed in collaboration with Loic Bruni, featuring an adapted minimum reach setting. It offers a comfortable length to conserve hand strength whilst still providing a crisp feel at the pressure point. In the event of a crash, a predetermined breaking point on the grip surface ensures that the brake lever sustains less damage. Thanks to the bolted lever pivot point, changing levers is even quicker than usual. Integrated Shiftmix compatibility allows you to fit SRAM and Shimano shift levers to the GUSTAV.

Magura Gustav Pro brake caliper:

The solid, high-quality aluminium-forged four-piston brake caliper delivers concentrated braking power to the disc. Four pistons with a diameter of 19 mm handle this task. The one-piece design increases stiffness and ensures a very responsive feel. Compatible with 2.5 mm thick MDR-S brake discs and Magura standard discs with a thickness of 2 mm

Plug-and-play for your brake line: the quick and flexible way to disconnect and connect a line. And as often as you like. From model year 2025 onwards, EASY LINK is integrated into the GUSTAV PRO and is also available as a retrofit valve for MAGURA MT disc brakes. Once routed, you can simply click brake lines into the brake lever using EASY LINK. No need for bleeding or other steps! Thanks to EASY LINK, the GUSTAV PRO’s brake caliper and lever can be delivered separately and pre-filled. This makes it easier for you to replace them in the event of a fault or a crash.

Magura Royal Blood:

Magura continues to rely on high-performance mineral oil as the brake fluid. It is completely harmless to health in the event of skin contact, and as it does not absorb water over time like DOT fluid, bleeding intervals are significantly longer. For optimal performance, bleeding is required every 6–12 months, depending on frequency of use.

The Magura Gustav PRO forms the ideal pairing with the optionally available Magura MDR-S 2.5 discs. Thanks to their 2.5 mm thick friction ring, lasting stability is guaranteed even on long downhill runs. Furthermore, with this thickness, a diameter of 203 mm is entirely sufficient. Of course, conventional brake discs can be used without any problems. The 13.S brake
pads have been fitted for optimum deceleration. They contain approximately 40% more material compared to the MT7 and ensure smooth and powerful braking, as well as extremely low wear. Furthermore, the special compound eliminates the need for a long bedding-in period.

Herstellerinformation: Magura, Stuttgarter Straße 48, 72574 Bad Urach, Germany, http://www.magura.com