Shimano XTR FDM 9025 front derailleur

The new Shimano XTR 11-speed components, designed for use ranging from cross-country to enduro. Available with a crankset featuring 1–3 chainrings and an 11-speed cassette with a 11–40 tooth range.

Shimano XTR FD-M9025 Front Derailleur

Only the finest materials are used in the XTR 11-speed front derailleurs FD - M9025; perfectly matched to the new 11-speed XTR components, the XTR front derailleurs offer outstanding shifting performance.

Shimano XTR 9025 Front Derailleur Compatibility:

The new Shimano 11-speed XTR front derailleur series is only compatible with the XTR 11-speed RDM9000 rear derailleurs and SLM9000 shift levers. The HG-900 chain is recommended. The 11-speed XTR cassettes are also compatible with 9- and 10-speed Shimano-compatible freehub bodies.

Shimano XTR Top Swing derailleur:

The seat tube clamp is mounted approximately 6 cm above the centre of the bottom bracket. The inner diameter of the clamp is 34.9 mm; reducer sleeves for 31.8 mm and 28.6 mm are included in the scope of delivery.

Shimano XTR FD - M9025 Derailleur Technology

• 2x11-speed
• Clamp 34.9 mm, including adapters to 31.8 and 28.6 mm
• Down Pull, cable routing from below
• Top Swing
• Titanium hardware
• Aluminium parallelogram
• Stainless steel pivot pins
• Titanium hardware
• Compatible with all Shimano 11-speed MTB shifters
• Mounting angle 66–69 degrees
• Largest sprocket to be shifted: 38 teeth
• Total capacity: 10 teeth
• Weight: FDM - 9025: 135 grams

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com