Shimano XT 10-speed front derailleur FD-M781 Down Sing.

Perfectly matched to Shimano 10-speed MTB cranksets with 3 chainrings and the new Shimano HG-X chains, the FD-M780 front derailleur offers the excellent shifting performance typical of Shimano.

The excellent shifting performance is typical of Shimano. The angled adjustment screws are easy to reach. The cage has been redesigned and is now lighter than before. In addition, the shape of the cage has been modified to increase tyre clearance. The widened parallelogram, with its wider pivot base, reduces flex and thus leads to faster shifting and a longer service life.

This derailleur also features the Dual Pull cable routing system, allowing for both top-pull and down-pull cable routing. Recommended for all full-suspension bikes with a low pivot point. The specified maximum chainring difference is the official Shimano specification. Due to the more stable parallelogram support, we recommend this derailleur wherever it fits.

Shimano XT front derailleur technology:

The clamp is mounted approximately 14 cm above the bottom bracket axle.

• Aluminium clamp
• Chrome-plated steel chain guides
• Clamp size 34.9 mm, reducible to 31.8 mm using an adapter (not included)
• Largest chainring to be used: 42 teeth
• Smallest chainring to be used: 24 teeth
• Maximum chainring difference: 18 teeth
• Angle: 63–66 degrees
• Weight: 151 grams

Compatible with all Shimano Dyna-Sys 10x3-speed shifters and Sram MTB front derailleur shifters.

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com