Shimano XTR FDM 9025 front derailleur

The new Shimano XTR 11-speed components, designed for use ranging from cross-country to enduro. Available with a crankset featuring 1–3 chainrings and an 11-speed cassette with an 11–40 tooth range.

Shimano XTR FD-M9025 front derailleur:

Only the finest materials are used in the XTR 11-speed FD-M9025 front derailleurs; perfectly matched to the new 11-speed XTR components, the XTR front derailleurs offer outstanding shifting performance.

Shimano XTR 9025 front derailleur compatibility:

The new Shimano 11-speed XTR front derailleur series is only compatible with the XTR 11-speed RDM9000 rear derailleurs and SLM9000 shift levers. The HG-900 chain is recommended. The 11-speed XTR cassettes are also compatible with 9-10-speed Shimano-compatible freehub bodies.

High Direct Mount Front Derailleur:

The front derailleur is mounted directly onto frames designed for this purpose; the bolt spacing is 60 mm vertically. Thanks to the slotted holes, this front derailleur can be adjusted for height.

Shimano XTR FD-M9025 Front Derailleur Technology

• 2x11-speed
• High Direct Mount, vertical bolt spacing 60 mm
• Dual Pull, cable routing from above
• Down Swing
• Titanium hardware
• Aluminium parallelogram
• Stainless steel pivot pins
• Compatible with all Shimano 11-speed MTB shifters
• Mounting angle 66–69 degrees
• Largest sprocket to be shifted: 38 teeth
• Total capacity: 10 teeth
• Weight: FDM-9025: 135 grams

Herstellerinformation: SHIMANO INC., 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan, www.shimano.com | EU contact: Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, The Netherlands, www.shimano.com