Sram Apex 1 HRD disc brake

The secret to real riding enjoyment on every ride is confidence in your brakes. Go full throttle wherever you like, because you know you can stop whenever you want – that’s what the APEX 1 HRD shift-brake levers offer. They rely on our proven HydroR braking system and ensure optimum control on every ride. Integrated into the HydroR brake lever is our DoubleTap 11-speed shifter, which guarantees precise shifting wherever you’re riding.

Sram Apex 1 Reach Adjust: The fit and ergonomics of the shift-brake lever are a very personal matter. Riders have individual positioning preferences as well as unique hand sizes and finger lengths. With the reach adjustment, the lever can be adjusted with ease – for maximum control with just one finger

SRAM Apex 1 HRD shift-brake lever technology:

• 1x11-speed right-hand hydraulic shift/brake lever
• Material: Aluminium shift and brake levers
• Other: Ergonomic design and improved comfort with grip width adjustment and minimal weight, internally and externally routed shift cables, and longer, optimised levers
• Easy bleeding
• Compatible brakes: SRAM Red, Force, Rival, Apex hydraulic rim and disc brakes
• Must only be used with DOT brake fluid

SRAM Apex 1 HRD disc brake technology:

• Post Mount
• Optimised power and modulation for road bikes and cyclocross
• 18 mm brake caliper piston
• Hydraulic brake cylinder
• Fully sealed system protects against contamination
• Recommended brake discs: Sram Centerline
• Recommended brake disc sizes: 140 mm, 160 mm
• Must only be used with DOT brake fluid

Included in delivery:

SRAM Apex 1 HDR 11-speed right-hand shift/brake lever, rear disc brake including brake pads, shift cable, 1800 mm brake hose, fully pre-assembled and bled

Post Mount brake caliper standard:

The Post Mount brake caliper standard was originally developed for MTB disc brakes, but is also found on older road and gravel bikes with disc brake mounts. The bolt spacing for mounting the brake calipers is 74 mm. These brake calipers can be mounted directly depending on the frame/fork mount. An adapter is required for larger discs and/or IS2000 mounts.

IS 2000: Side-mounted. An adapter is always required to mount the brake caliper; 160 mm on the fork and 140–160 mm disc size on the frame. Found on older forks and rear triangle frames

Post Mount, PM5: Direct mounting of the brake caliper without an adapter for 140 mm brake discs. Maximum 160 mm, minimum 140 mm disc size.

Post Mount, PM6: Direct mounting of the brake caliper without an adapter for 160 mm brake discs. Maximum 160 mm, minimum 160 mm on the fork and frame.

Herstellerinformation: SRAM, 1000 W Fulton Market #4, 60607 Chicago, Illinois, United States, http://www.sram.com | Contact EU: SRAM Europe Sales and Services B.V., Paasbosweg 16, 3862 ZS Nijkerk, Netherlands, https://www.sram.com