Cane Creek 110 Headset

The Cane Creek 110 ZS44 headset top cup and EC44 bottom cup for frames with an installation dimension of 44 mm at the top and bottom of the head tube and forks with a steerer tube diameter of 1 1/8 inch / 28.6 mm at the top and bottom.

Cane Creek 110 Headset Specifications and Dimensions:

• Headset: 7075-T6 aluminium, CNC-machined
• Bearings: Stainless steel cartridge bearings with multiple seals
• Height at top: 9 mm with cap
• Height at bottom: 12 mm
• Weight: 88 grams (manufacturer’s specification)
• Contents: Cane Creek headset including end cap and clamp for aluminium / steel forks

Cane Creek bearings:

Fitted with high-quality stainless steel cartridge bearings, designed to protect all components from dirt and corrosion through multiple seals. This not only maximises service life but also minimises maintenance intervals. The prerequisites for a worry-free and unobtrusive headset.

ZS44/28.6 top thread:

The ZS headset is pressed into the head tube at the top; the press-fit dimension in the frame is 44 mm and the fork steerer tube diameter is 1 1/8 inch / 28.6 mm at the top.

EC44/30 Bottom installation dimension:

The EC headset is pressed into the head tube at the bottom; the press-fit dimension in the frame is 44 mm and the fork steerer tube diameter is 1 1/8 inch at the bottom. The headset cone requires a 30 mm seat on the fork.

ZS/Zero Stack – semi-integrated headset:

Head sets designated ZS / Zero Stack are also referred to as semi-integrated head sets. They require a frame designed for this purpose with an exact match for the bearing cups. Zero Stack refers to the minimal protrusion of the bearing cups from the head tube, whilst ZS44, for example, denotes the installation dimension, the outer diameter of the bearing cup and the inner diameter of the bearing cups within the frame. These headsets can generally be fitted without special tools, provided the frame has been cleanly pre-milled.

EC/External Cup – external headset:

Headset sets designated EC / External Cup are also referred to as external or classic headset sets. These headset sets require a frame designed for this purpose with an exact fit for the bearing cups. ‘External Cup’ refers to the relatively large projection of the bearing cups beyond the head tube, whilst ‘EC44’, for example, refers to the installation dimensions, the outer diameter of the bearing cup and the inner diameter of the bearing cups within the frame. These headsets must be fitted using a special tool; the frame simply needs to be cleanly pre-milled.

Herstellerinformation: Cane Creek, 355 Cane Creek Road, 29732 Fletcher, North Carolina, United States, https://www.canecreek.com