Freewheel body kit DT Swiss MTB

For converting DT Swiss 370 MTB hubs, with the Ratchet LN system, to the SRAM XD system for 11-speed and 12-speed XG and Transition MTB cassettes.

• The kit includes the freehub body and the right-hand frame stop for 12x135mm or 12x150mm thru-axle mounting. The right-hand end stops for the mounting dimensions are the same; the hub widths differ.
• Due to the special seal, the Ratchet LN freehub bodies do not fit the Ratchet 350 and 240S hubs, but only the new DT Swiss 370 hubs and wheelsets featuring these hubs. Conversion kits containing sprockets, springs and a hub insert are available to convert older 370 series hubs with the 3-pawl system to the Ratchet LN system.
• DT Swiss manufactures specific right-hand endstops for each cassette system, such as Shimano HG10, Shimano HG11, Shimano Micro Spline, Sram XD, Sram XDR, Campa ED and Campa N3W. These are also required for conversion if not already present. The right-hand end stops from older systems, such as 3-pawl or Ratchet Star, are also compatible with the new freehub bodies.

Not compatible with Pawl / 3-pawl, Ratchet Star, Ratchet EXP, Ratchet DEG hubs.
Not suitable for converting the hubs to a different installation size

The SRAM XD mountain bike freehub body system allows the installation of SRAM 11-speed and 12-speed XG MTB cassettes on DT Swiss MTB wheels. The DT Swiss XD freehub body offers the option to convert your rear wheel to this system. These freehub bodies differ from the road bike XDR freehub bodies in that they are 1.8 mm narrower. Total width 34.10 mm, cassette depth 28.5 mm. These freehub bodies can be used with SRAM 12-speed AXS road bike XG cassettes.

Herstellerinformation: DT Swiss, Längfeldweg 101, 2504 Biel, Bern, Switzerland, https://www.dtswiss.com/