Head sets for road, gravel, cyclocross and MTB frames
A bike is only as good as its steering. The S.H.I.S. Headset Standard helps you find the right model for every bike.
S.H.I.S. Headset Standard
The Standardized Headset Identification System, or S.H.I.S. for short, brings order to the multitude of headsets available on the market. A headset consists of an upper part between the stem and the head tube and a lower part between the head tube and the fork crown. The S.H.I.S. code provides three parameters for each of these parts:
for example, EC44/40: EC type, 44 outer diameter and 28.6 inner diameter.
EC / External Cup headsets:
Headset sets designated EC / External Cup are pressed into the frame. For this, the internal diameter of the head tube and the external diameter of the headset must match exactly. The head tube must be precisely machined flat, which requires special tools. The bearing cups sit outside the frame
ZS / Zero Stack, semi-integrated headsets:
ZS / Zero Stack headsets are pressed in; depending on how well the frame is prepared, special tools may be required. The bearing cups sit inside the head tube. This is why ZS headsets are also referred to as semi-integrated.
IS / Integrated Standard, fully integrated headsets:
IS / Integrated Standard headsets require a head tube with a bearing race. The bearings, without bearing cups, are inserted into the bearing seat in the head tube. No special tools are required. IS headsets are also referred to as fully integrated.
FSA Orbit CE Headset 1 1/8 inch Ahead black fully integrated 8 mm cap
The FSA Orbit CE headset, 1 1/8-inch Ahead in black, for fully integrated steerer tubes, Campagnolo standard, with an 8 mm cap.
Chris King Headset Spare Part NoThreadSet Bearing Cap | Upper bearing cap, black, 1 inch
The upper bearing cap for the Chris King NoThreadSet Ahead 1-inch headset, in black.
Chris King Headset Spare Part NoThreadSet Bearing Cap | Upper bearing cap, 1 inch, red, 1 inch
The upper bearing cap for the Chris King NoThreadSet Ahead 1-inch headset, in red.
Cane Creek 110 Bottom Cup 1 1/8 inch | IS41/30 black
Cane Creek fully integrated headset, 110 lower cup, Integrated Standard IS41 / 30 mm lower cup, 7075-T6 aluminium, colour: black
Cane Creek 110 Bottom Cup 1.5" | IS52/40 Black
Cane Creek fully integrated headset, 110 lower cup, Integrated Standard IS52 / 40 mm lower cup, 7075-T6 aluminium, colour: black
Cane Creek 110 Headset Upper Cup 1 1/8 inch | ZS44/28.6 Cap 15mm black
Cane Creek semi-integrated headset 110 top tube, Zero Stack ZS44 / 28.6 mm, 15 mm cap, aluminium / stainless steel, colour: black
Cane Creek 110 Headset Upper Cup 1 1/8 inch | ZS44/28.6 Cap 8mm black
Cane Creek semi-integrated headset 110 top tube, Zero Stack ZS44 / 28.6 mm, 8 mm cap, aluminium / stainless steel, colour: black
Ritchey WCS Carbon Headset Upper Cup Pressfit 1 1/8 inch ZS44 Cap 12.4 mm – Remaining stock
Ritchey WCS Carbon Pressfit headset top cup, Zero Stack, 12.4 mm carbon cap, ZS44/28.6 mm, 1 1/8 inch
Cane Creek 110 Headset Spare Part | Fork Cone 41/30 mm 1 1/8 inch Aluminium
Cane Creek Spare Part Series 110 Fork Cone for EC / ZS / IS 41/30 mm bottom headset, fork steerer tube diameter 1 1/8 inches at the bottom, material aluminium, colour black
Cane Creek 110 Headset Spare Part | Fork Cone 52/40 mm 1.5 inch Aluminium
Cane Creek spare part: Forty fork cone for EC / ZS / IS 52/40 mm bottom headset, fork steerer tube diameter 1.5 inches at the bottom, material: aluminium, colour: black
Cane Creek 110 Headset Spare Part | Fork Cone 52/30 mm 1.5 - 1 1/8 inch Aluminium
Cane Creek spare part 110 fork cone for EC / ZS / IS 52/30 mm bottom headset, tapered fork steerer tube diameter 1.5 to 1 1/8 inches at the bottom, material aluminium, colour black
Cane Creek Interlok Spacer | 28.6 mm, 1 1/8 inch, 10 mm, gloss black
Cane Creek Interlok spacer for 1 1/8 inch / 28.6 mm headsets (Forty / 110 / Hellbender / Viscoset), height 10 mm, material: aluminium, colour: gloss black
Cane Creek Headset Spare Part | Shim Washer IS/28.6 mm 0.25 mm
Cane Creek replacement shim washer for IS 28.6 mm headset, diameter 28.6 mm, height 0.25 mm, material: aluminium
