DT Swiss 350 Road Bike Wheelset plus Mavic CXP Pro
A high-quality, sturdy wheelset for road bikes with rim brakes. Lightweight yet sturdy and durable, suitable for tyres between 19 and 35 mm wide.
We offer the wheels with freehub bodies for Shimano, Campagnolo or SRAM XDR cassettes. The DT Swiss 350 Classic Road Non-Disc hubs are designed for classic quick-release mounting.
Wheel building at TNC-Hamburg:
We hand-build these wheels exclusively for you. Thanks to over 30 years’ experience in wheel building, we extract the optimum in roundness, durability and stiffness from the materials. These wheels are, of course, tested multiple times; we also pre-load the spokes in both the radial and lateral directions. This eliminates the need for re-truing over a long period. We use DT Swiss spokes exclusively. These ensure outstanding durability of the wheels. For enduro use, we recommend brass nipples.
These wheelsets are made to order specifically for you, which is why we cannot offer a right of withdrawal for them. We are unable to offer cash on delivery for these wheelsets
Included in delivery:
- Front wheel fully laced and hand-trued in our workshop with a DT Swiss 350 Classic No Disc hub, DT spokes, nipples and Mavic CXP Pro rim as selected.
- Rear wheel fully laced and hand-trued in our workshop with a DT Swiss 350 Classic No Disc hub, DT spokes, nipples and Mavic CXP Pro rim as selected.
- Excludes rim tape and valve
Please feel free to enquire about other wheel set configurations. We will then send you a quote.
DT Swiss 350 Non Disc front hub specifications:
- Housing material: Aluminium
- Axle: Aluminium
- Industrial ball bearings
- Seal-less sealing system
- Weight: 140 grams Manufacturer’s specification
- Approved for radial spoke lacing
- QR9, clamp width 9 x 100 mm, not convertible
DT Swiss 350 Non Disc rear hub technology:
- Housing material: Aluminium
- Freewheel body: Aluminium with 2 pawls, specially coated
- Axle: Aluminium
- Industrial ball bearings
- Seal-less sealing system
- Weight: 252 grams
- Mounting dimensions: 10x130mm for quick-release mounting
Mavic CXP Pro rim technology - Dimensions:
- 28 inches, 700 C
- ETRTO 622 x 15
- ERD 595 mm
- Maxtal aluminium rim
- SUB-welded and eyeleted
- Width: 19.4 mm - Height: 23.6 mm
- Brake flange: 9 mm
- Maximum tyre width 19–28 mm
- Valve hole 6.5 mm
- Recommended spoke nipple length 14 mm
- Weight: 470 grams
DT Swiss 350 hubs
With the 350 hubs, DT Swiss offers affordable, high-quality hubs. From road bike to downhill versions, the 350 hub range is designed for maximum durability. Equipped with high-quality seals and bearings, they are the ideal choice if you are looking for hubs for durable, low-maintenance wheelsets. The DT 350 rear hubs are also fitted with DT’s patented freehub body system. Two sprockets mesh together to guarantee loss-free power transmission.
DT Competition Spokes:
The double cold-forged spoke made from rust-resistant 18/10 chrome-nickel steel with a tapered middle section for robust, lightweight wheelsets. We recommend these spokes for virtually all wheelsets. Extremely durable and sufficiently lightweight, the DT Competition spokes enable wheel building at the highest level. Thanks to the tapered section in the middle, the spokes absorb movements in the wheel exceptionally well, without compromising on lateral stiffness or durability. Weight with nipple approx. 7 grams
DT Swiss Squorx Pro Head spoke nipples:
The DT Squorx Pro Head nipple combines ease of installation, light weight and top performance in a single product. The spherical contact surface ensures perfect alignment with the spoke, whilst the square head allows for easy re-centring using standard tools whilst the tyre is fitted.
Mavic CXP Pro rim
With a profile height of a good 23 mm, the Mavic CXP Pro road bike rim literally cuts through the wind. At the same time, the Maxtal aluminium alloy saves weight. The SUP-welded and eyeleted Mavic CXP 33 is also exceptionally stable and durable. Successful aerodynamics with top performance from Mavic.
Herstellerinformation:
